Metal Detecting Equipment

Metal Detecting Equipment
[ Post a Message | Old forum archive ]

Archives User comments and opinions are welcomed here. This site is not sponsored by any dealer or manufacturer of detecting equipment. Everyone is encouraged to speak out in a responsible manner expressing both good and bad experiences with any make, model or brand detector or accessory. Our mission is to increase the knowledge base of all readers by sharing our collective insight and to provide sound advice without editorial bias.

Vibrabrobe VS Minelab - Bjorn 8/9/2006, 4:58 pm

Not only me then - Bjorn 8/10/2006, 12:22 pm

Re: Vibrabrobe VS Minelab - Mike Hillis 8/10/2006, 9:58 am

Yes, I use the Pocket UniProbe too - BobD 8/10/2006, 4:58 pm

Re: Vibrabrobe VS Minelab - Kevin 8/10/2006, 1:47 am

Re: Vibrabrobe VS Minelab - serro59 8/10/2006, 9:17 am

Re: Vibrabrobe VS Minelab - BobD 8/9/2006, 6:20 pm

Discovery 3300 & Radio Shack - Jeff England 8/8/2006, 1:45 pm

great price! - Alan-CA 8/9/2006, 4:17 pm

Re: great price! - jim s. 8/9/2006, 8:40 pm

Re: Discovery 3300 & Radio Shack - Carl-NC 8/8/2006, 11:16 pm

Same detector as the Titan 3000XD - Old California 8/8/2006, 6:46 pm

Yeah, it's a close relative to - jim s. 8/8/2006, 8:38 pm

Re: Yeah, it's a close relative to - Old California 8/8/2006, 10:37 pm

HEHEHEHE....It's a great detector...I bought 3 of them.... - KCK 8/8/2006, 11:01 pm

Do not feed the display detectors - Tom (AZ) 8/9/2006, 8:14 am

Mark 1 for sale - ChipP 8/6/2006, 8:50 pm

Run over my MXT, - jim s. 8/6/2006, 6:09 pm

Re: Run over my MXT, - Rudy 8/7/2006, 9:02 pm

UPDATE - jim s. 8/7/2006, 10:40 pm

Re: Run over my MXT, - Paul WV 8/7/2006, 7:55 am

Re: Run over my MXT, - jim straight 8/7/2006, 9:42 am

I have cases.... - K Wills 8/7/2006, 3:54 pm

Re: I have cases.... - jim straight 8/7/2006, 4:50 pm

Re: Run over my MXT, - Randy Seden 8/7/2006, 1:31 am

Re: Run over my MXT, - jim straight 8/7/2006, 9:31 am

Re: Run over my MXT, - Randy Seden 8/8/2006, 1:02 am

Re: Run over my MXT, - jim straight 8/10/2006, 7:04 pm

94 B - George Kinsey 8/4/2006, 7:22 pm

Re: 94 B - Old California 8/4/2006, 9:41 pm

Re: 94 B - George Kinsey 8/5/2006, 8:08 pm

Different type of square nails react different.. - Old California 8/5/2006, 9:13 pm

really? - Tom_in_CA 8/6/2006, 11:18 pm

Re: really? - Paul (Ca) 8/7/2006, 12:48 am

Re: really? - Steve(MS) 8/7/2006, 2:35 am

Re: really? - reply - Tom_in_CA 8/7/2006, 8:16 am

Re: 94 B - Tom (AZ) 8/4/2006, 11:16 pm

Re: 94 B - JB(MS) 8/4/2006, 8:25 pm

Toltec 11-Does this detector have notch on it? - Bobsw.mo 8/3/2006, 8:58 pm

Re: Toltec 11-Does this detector have notch on it? - Dan.Pa. 8/4/2006, 9:26 am

I don't think so - BobD 8/3/2006, 9:39 pm

The Toltec 100 had notch - BobD 8/3/2006, 10:44 pm

pi--question - jim 8/2/2006, 1:17 pm

Re: pi--question - Old California 8/2/2006, 2:51 pm

Re: pi--question - jim 8/2/2006, 6:07 pm

Re: pi--question - Old California 8/2/2006, 6:48 pm

Re: pi--question - jim s 8/2/2006, 3:36 pm

Re: pi--question - Old California 8/2/2006, 6:57 pm

Re: pi--question - jim straight 8/2/2006, 6:43 pm

Santa Monica - Old California 8/2/2006, 7:03 pm

Re: Santa Monica - jim straight 8/2/2006, 8:59 pm

Would someone do me a favor please, - jim s 8/2/2006, 6:37 am

Thanks Dale, traded coil.....n/t - jim s 8/3/2006, 9:06 am

Re: Thanks Dale, traded coil.....n/t - Dale-IL 8/3/2006, 2:43 pm

Re: Would someone do me a favor please, - jim straight 8/2/2006, 1:05 pm

probably banned like every one else - Alan-CA 8/2/2006, 10:17 am

OCDBD - Tex Kinsey 8/1/2006, 7:14 pm

Re: OCDBTD - Gary (Cen FL) 8/4/2006, 12:53 pm

Re: OCDBANESOD - Jerry Talley 8/2/2006, 11:16 pm

HAWLOMDIAGT - Dig'n in Va. 8/2/2006, 3:58 pm

Re: OCDBD - Dan.Pa. 8/2/2006, 8:24 am

YGTR - jim s 8/1/2006, 8:31 pm

Is this a great forum or what?..................... - JB(MS) 7/31/2006, 9:32 pm

Yep.......... - Jbird 8/1/2006, 9:13 am

Dang !! ;) - Seeker (ak) 8/1/2006, 5:25 am

Re: Is this a great forum or what?..................... - Carl 8/1/2006, 2:04 am

That was good all right, - jim s 7/31/2006, 11:26 pm

Anyone interested in some Cointrax and pro hunter modules - Scott Me 7/30/2006, 9:33 pm

...and a base baron needed - Scott Me 7/30/2006, 1:12 pm

Hard to find........ - JB(MS) 7/30/2006, 5:45 pm

Well yah..guess I should say...what is around for Barons that.. - Scott Me 7/30/2006, 6:34 pm

MD 3006SS - GEORGE ALBERT MARQUES 7/29/2006, 10:00 am

They're made in China - BobD 7/30/2006, 7:11 am

if the translation doesn't work use Babel Fish - BobD 7/30/2006, 7:15 am

Re: MD 3006SS - norm 7/30/2006, 2:51 am

Re: MD 3006SS - GEORGE ALBERT MARQUES 8/8/2006, 2:03 am

Re: MD 3006SS - Brian 7/31/2006, 3:44 am

Re: MD 3006SS - CALAMARI 8/12/2006, 9:20 am

John...Awesome job... - KCK /Ohio 7/29/2006, 8:41 am

Anyone have a Gold Trax to part with - Scott Me 7/29/2006, 1:25 am

Hey Scott - Kevin (Alberta) 7/29/2006, 1:30 pm

Email me please - Scott Me 7/29/2006, 10:01 pm

Compass 94B - George Kinsey 7/28/2006, 9:32 pm

Re: Compass 94B - PaulPalomo@msn.com 7/29/2006, 1:23 pm

Re: Compass 94B - Tex Kinsey 8/1/2006, 7:11 pm

Re: Compass 94B - Steve(MS) 7/29/2006, 2:23 pm

Re: Compass 94B - PaulPalomo@msn.com 7/29/2006, 7:48 pm

Re: Compass 94B - Tom_in_CA 7/28/2006, 11:38 pm

Re: Compass 94B - George Kinsey 7/29/2006, 4:48 am

Re: Compass 94B - Tom (AZ) 7/29/2006, 12:17 pm

Test Result From Garrett Water Machine Conversion #1 - John - Edmonton 7/28/2006, 12:05 am

Re: Test Result From Garrett Water Machine Conversion #1 - Dan-Pa. 7/28/2006, 9:15 am

Good Luck John... - Seeker (ak) 7/28/2006, 1:20 am

Built A Water Machine Out Of A Garrett Ace 150. - John - Edmonton 7/26/2006, 4:43 am

Neat! - BobD 7/27/2006, 3:11 am

Minelab new and improved . . . - Tony (Michigan) 7/25/2006, 4:11 pm

is this unusual? - BobD 7/25/2006, 10:49 pm

Re: is this unusual? - Tony (Michigan) 7/26/2006, 1:20 pm

Re: is this unusual? - BobD 7/26/2006, 10:05 pm

more arrows goin deeper in the ground? LOL - Alan-CA 7/25/2006, 4:30 pm

Re: more arrows goin deeper in the ground? LOL - Tony (Michigan) 7/25/2006, 9:23 pm

Is it me, my detectors, or my ground? - George (MN) 7/21/2006, 6:55 pm

thanks all! - George (MN) 7/23/2006, 5:46 pm

Re: thanks all! - Rick(ND) 7/24/2006, 12:41 am

It is all of that......... - Andy,NM 7/23/2006, 1:33 pm

Re: Is it me, my detectors, or my ground? - jackintexas 7/23/2006, 12:21 am

Re: Is it me, my detectors, or my ground? - John N 7/22/2006, 11:13 am

I couldn't agree more................ - Rob (B.C.) 7/22/2006, 1:05 pm

Nope its your sites... - Dan-Pa. 7/22/2006, 9:58 am

There are no failures in metal detecting... - Steve Herschbach 7/22/2006, 2:57 am

Steve's right . . . - Tony (Michigan) 7/22/2006, 10:20 pm

it's neither - BobD 7/21/2006, 11:00 pm

George............ - KCK 7/21/2006, 8:59 pm

Most detectors seem to have same depth - George (MN) 7/21/2006, 6:35 pm

Re: Take a look at the Fisher CoinStrike - Mike Hillis 7/23/2006, 2:24 am

Re: Most detectors seem to have same depth - Dan-Pa. 7/22/2006, 10:13 am

In it's day.. The Tecknetics S/T - FrankP 7/24/2006, 8:24 am

Re: In it's day.. The Tecknetics S/T - Brian 7/25/2006, 4:26 am

Re: Most detectors seem to have same depth - BobD 7/21/2006, 11:03 pm

Oh yea...95% of my great finds have been in the top 4" of soil! - KCK 7/21/2006, 9:03 pm

Seben Extreme planted coin test - George (MN) 7/21/2006, 6:27 pm

Re: Seben Extreme planted coin test - Dan-Pa. 7/22/2006, 10:08 am

Wow... I only have 7 right now! hehehe - KCK 7/21/2006, 9:05 pm

Re: Seben Extreme planted coin test - Hard Nosed Dave 7/21/2006, 7:52 pm

Fisher move to Texas? - Alan-CA 7/20/2006, 9:56 am

Tom is a good guy.... - K. Wills 7/23/2006, 5:44 am

Where did you see that post, Alan? - wade tx 7/21/2006, 9:24 am

posts deleted. - Alan-CA 7/21/2006, 11:03 am

Re: Fisher move to Texas? - jeff@middlesex 7/20/2006, 12:04 pm

Re: Fisher move to Texas? - Dan-Pa. 7/20/2006, 11:39 am

Re: Fisher move to Texas? - BobD 7/20/2006, 11:28 am

F-mall Fish. forum - Alan-CA 7/20/2006, 11:38 am

Re: F-mall Fish. forum - Carl 7/21/2006, 12:28 am

You may look, but the bragging stops here, right Mr. C ???????? n/t - jim 7/21/2006, 6:16 am

Bounty Hunter Red Baron User Manual Needed - Rev. Robert P. Chrysafis 7/20/2006, 8:45 am

Re: Bounty Hunter Red Baron User Manual Needed - Dan-Pa. 7/20/2006, 11:36 am

Nautilus 2B for gold detecting nuggets? - Tony (Michigan) 7/19/2006, 10:55 pm

Now for something unrelated to detecting but dang fun... - Scott Me 7/19/2006, 10:09 pm

Man..Scott..I want to see the pics - KCK 7/21/2006, 6:05 am

I think you missed... - Dan-Pa. 7/20/2006, 11:33 am

Well a little clarification.... - Scott Me 7/20/2006, 1:14 pm

Re: Well a little clarification.... - Carl 7/21/2006, 12:25 am

Pic 2 - Scott Me 7/19/2006, 10:11 pm

Pic 3 - Scott Me 7/19/2006, 10:13 pm

Until the Micro Mark 1 v2.0 arrives... - Scott Me 7/19/2006, 9:46 pm

Pic 2 - Scott Me 7/19/2006, 9:48 pm

Just checking in! :) - KCK 7/19/2006, 9:37 pm

Check - BobD 7/21/2006, 1:23 pm

minelab's - norm 7/17/2006, 1:28 am

Re: minelab's - norm 7/22/2006, 9:29 pm

Take a Look - Seeker 7/17/2006, 11:15 am

Re: minelab's - Tom_in_CA 7/17/2006, 1:53 am

Re: minelab's - Hard Nosed Dave 7/17/2006, 8:04 pm

Re: minelab's - Dan-Pa. 7/17/2006, 5:32 pm

Tom was rigtht, Minelab IS the Pinto. NT - jim 7/17/2006, 9:24 pm

Re: Tom was rigtht, Minelab IS the Pinto. NT - Tom_in_CA 7/18/2006, 5:47 pm

pros & cons - eddiecurrent 7/18/2006, 11:42 pm

Your that famous Tom from Cal. Right ? - jim 7/18/2006, 8:38 pm

That's it....keep buying foreign helps keep Americans unemployed!!!! - John N 7/18/2006, 10:23 am

What many don't know... - Dan-Pa. 7/19/2006, 9:51 am

Re: That's it....keep buying foreign helps keep Americans unemployed!!!! - Brian 7/19/2006, 5:26 am

Long Range Metal Detector - Tallyman 7/15/2006, 1:37 pm

Re: I think they can find water... - Steve(MS) 7/16/2006, 9:45 pm

THIS POST IS A PLANT!!!! - Craig 7/16/2006, 6:48 pm

Re: Long Range Metal Detector - jackintexas 7/16/2006, 12:25 pm

Re: Long Range Metal Detector - Tom_in_CA 7/16/2006, 10:16 pm

Heres my experience.. - Dan-Pa. 7/16/2006, 10:40 am

Re: Heres my experience.. - Ralph 7/17/2006, 7:52 pm

I thought of that... - Dan-Pa. 7/18/2006, 8:23 am

Re: Long Range Metal Detector - Carl-NC 7/15/2006, 5:30 pm

Re: Carl, carl, carl.... - Tom_in_CA 7/15/2006, 11:51 pm

So you guysdon't believe in Dowsing huh? - KCK 7/18/2006, 6:11 am

I hang my head in shame... - Carl-NC 7/16/2006, 8:10 am

So that's your secret huh Tom? N/T - Rudy 7/16/2006, 12:09 am

Analog Detectors Are History according to this!! - doug in ILL. 7/15/2006, 10:13 am

OOPS didn't read post below - doug in ILL. 7/15/2006, 10:15 am

Analog soon to be outlawed?? - Mike Hillis 7/14/2006, 3:20 pm

Meter movements are still available... - K. Wills 7/23/2006, 5:37 am

Re: Analog soon to be outlawed?? - bfodnes 7/18/2006, 11:43 am

Re: Analog soon to be outlawed?? - Carl-NC 7/15/2006, 9:27 am

This explains a lot - JoeR 7/14/2006, 7:15 pm

Ah yes...The Peoples Republic of California... - Scott Me 7/14/2006, 6:49 pm

That sounds like My story Scott! You just beat me to it. It's 1000% true! - Terry Bradley 7/17/2006, 9:39 pm

Re: It's all about Business and Money - Steve(MS) 7/15/2006, 3:21 am

Welcome to Facism USA Style...... ! - Ralph 7/15/2006, 7:45 pm

Beginner needs help!! - Lane 7/13/2006, 1:58 pm

Re: Beginner needs help!! - norm 7/13/2006, 11:11 pm

Re: Beginner needs help!! - jim searcy 7/13/2006, 4:05 pm

Radio Shack 3300 - Tom (AZ) 7/13/2006, 6:13 pm

Re: Radio Shack 3300 - jackintexas 7/13/2006, 6:56 pm

dfx programs - Gary 7/12/2006, 5:57 pm

Love hate situation.. - Dan-Pa. 7/15/2006, 9:11 am

Re: dfx programs - jim searcy 7/12/2006, 8:53 pm

Re: Keep mine in a box - Tom (AZ) 7/13/2006, 7:24 am

Save your cash gang.. - George Tex Kinsey 7/12/2006, 7:13 am

They are the ones I am waiting and saving for :) - Beachcomber 7/14/2006, 5:12 pm

ain't no miracle detectors out there - bob n. 7/13/2006, 4:46 pm

Re: Save your cash gang.. - beacheye 7/12/2006, 11:35 pm

Re: Save your cash gang.. - Carl 7/13/2006, 1:15 am

Check this out - JoeR 7/12/2006, 8:05 pm

makes me wonder ... - Bob D 7/12/2006, 10:11 pm

Re: Save your cash gang.. - Dan-Pa. 7/12/2006, 10:01 am

Re: Save your cash gang.. - John N 7/12/2006, 6:15 pm

Re: I spent 6,000.00 this year - George Kinsey 7/12/2006, 7:53 pm

Re: I spent 6,000.00 this year - jim searcy 7/12/2006, 9:04 pm

Re: Save your cash gang.. - FrankP 7/12/2006, 8:23 am

HEALTH Benefits, maybe we can get health insurnace to pay for a new detector? - Jerry Talley 7/13/2006, 1:58 pm

RELIC DETECTING - Lawrenzo 7/11/2006, 9:27 pm

Re: RELIC DETECTING - Dan-Pa. 7/12/2006, 10:10 am

Re: That's the 64000 dollar question Lawrenzo.... - Steve(MS) 7/12/2006, 1:36 am

Re: RELIC DETECTING - RichW 7/11/2006, 10:05 pm

whites Goldmaster vsat - EdS 7/11/2006, 12:08 pm

V-SAT's are good nugget machines - Tom (AZ) 7/12/2006, 1:12 am

Re: whites Goldmaster vsat - eddiecurrent 7/11/2006, 8:34 pm

Metrotech detector - john denson 7/10/2006, 7:56 am

Re: Metrotech detector - K. Wills 7/23/2006, 5:48 am

Re: Metrotech detector - Lost&Confused 7/10/2006, 11:24 pm

Re: Metrotech detector - Ty 7/10/2006, 8:06 am

Re: Question for Ty - Tom_in_CA 7/10/2006, 2:11 pm

Re: Question for Ty - JB(MS) 7/12/2006, 10:59 pm

Re: Question for Ty - Ty 7/10/2006, 6:36 pm

metrotech-great relic machine - bob n., 7/10/2006, 5:26 pm

Re: metrotech-great relic machine - john.denson 7/12/2006, 2:00 pm

Metrotech - Seeker (ak) 7/10/2006, 6:06 pm

Relco- Pacesetter - norm 7/10/2006, 12:00 am

Re: Relco- Pacesetter - C.A. Plug 7/10/2006, 1:50 pm

Re: Relco- Pacesetter - Mrand 7/10/2006, 1:32 am

Re: Relco- Pacesetter - Tom_in_CA 7/10/2006, 1:13 am

Re: Relco- Pacesetter - norm 7/11/2006, 12:36 am

Just so we don't forget..... - JB(MS) 7/9/2006, 3:24 pm

Micro Mark 1 - George Tex Kinsey 7/12/2006, 7:10 am

Re: Micro Mark 1 - doug in ILL. 7/12/2006, 10:14 pm

That is good news. - Mike Hillis 7/10/2006, 9:24 am

Re: Just so we don't forget..... - Jeff 7/9/2006, 4:57 pm

Re: Just so you know...I'm waiting! :) - KCK /Ohio 7/9/2006, 11:04 pm

Re: Just so we don't forget..... - PaulWV 7/9/2006, 4:31 pm

Re: Just so we don't forget..... - JB(MS) 7/9/2006, 5:14 pm

Re: We definitely will not forget! - Steve(MS) 7/11/2006, 2:04 am

Hooooooo Yahhhhhhhh !! - Seeker (ak) 7/9/2006, 4:19 pm

Micro mark-1 funding - Doug in ILL. 7/9/2006, 11:53 pm

Tesoro users - bfodnes 7/8/2006, 4:39 am

That would be an easy addition to add on, - Old California 7/10/2006, 1:54 am

Re: Tesoro users - Wayne/TX 7/8/2006, 2:49 pm

Sounds good.. - Dan-Pa. 7/9/2006, 10:03 am

Re: Sounds good.. - bfodnes 7/9/2006, 10:09 am

Max Boost Switch?? - Joe(TX) 7/9/2006, 4:14 pm

You're right Joe, 77 Auto Legend did have one. - Old California 7/10/2006, 12:50 am

Nice! - bfodnes 7/9/2006, 8:34 am

THunting.com - Your one stop treasure resource is back online - Christian 7/7/2006, 12:07 am

Re: THunting.com - Your one stop treasure resource is back online - bfodnes 7/9/2006, 10:52 am

Modified Liberty Di - PaulWV 7/4/2006, 8:38 pm

Re: Modified Liberty Di - Paul, You might want to re-list it before it gets a bid. - terry Bradley 7/4/2006, 9:46 pm

Re: Modified Liberty Di - Paul, You might want to re-list it before it gets a bid. - Paul WV 7/5/2006, 8:44 am

Re: Modified Liberty Di - Paul, You might want to re-list it before it gets a bid. - Old California 7/5/2006, 1:23 pm

Actually, You can go into it and change the wording without re-listing (before it gets a bid). - terry Bradley 7/4/2006, 9:50 pm

Nice unit, - Old California 7/4/2006, 9:10 pm

Re: Nice unit, - Paul WV 7/5/2006, 9:32 am

Re: Nice unit, - Paul WV 7/5/2006, 8:41 am

Paul question - jeff@middlesex 7/5/2006, 6:31 pm

Re: Paul question - Paul WV 7/6/2006, 7:29 am

thanks n/t - jeff@middlesex 7/6/2006, 10:54 am

Compare - Lawrenzo 7/4/2006, 6:34 pm

Re: Compare - Old California 7/5/2006, 1:41 pm

Hey Paul - JoeR 7/6/2006, 4:07 pm

Re: Hey Paul - Old California 7/6/2006, 9:39 pm

Now THAT is a well written reply! - JoeR 7/6/2006, 10:34 pm

Opinions on the M6 - John N 7/4/2006, 2:46 am

Re: Opinions on the M6 - Old California 7/7/2006, 9:25 pm

Re: Opinions on the M6 - Andy,NM 7/6/2006, 2:21 pm

Re: Opinions on the M6 - Brian 7/7/2006, 3:45 am

early M6 reviews were so so - Bob D 7/4/2006, 4:25 pm

I've got an MXT and I wonder - George (MN) 7/4/2006, 4:18 pm

Re: Opinions on the M6 - Beacheye 7/4/2006, 3:51 pm

Re: Opinions on the M6 - jeff@middlesex 7/4/2006, 6:44 am

Bounty Hunter 3300 - kck 7/3/2006, 11:05 pm

Re: Bounty Hunter 3300 - Beacheye 7/4/2006, 3:54 pm

3300 best bang for the buck - Tom (AZ) 7/4/2006, 8:35 pm

call your local radio shack(s) - Bob D 7/4/2006, 4:21 pm

Re: call your local radio shack(s) - Ron Tindall 7/5/2006, 9:09 pm

Re: call your local radio shack(s) - Eric 7/10/2006, 12:51 am

Happy 4th of July Good Neighbors :) - kck 7/3/2006, 10:47 pm

Nexus in N.America - jeff@middlesex 7/3/2006, 7:41 pm

Nexus in N.America at times you think there's nothing new under the sun - kck 7/3/2006, 10:57 pm

EXcelerator Coils for MXT - Randy Seden 7/2/2006, 7:35 pm

Lobo ST Question - JoeR 7/2/2006, 8:47 am

Never saw it. - TomNWMI 7/4/2006, 11:21 am

Re: Lobo ST Question - Rick, N. MI 7/2/2006, 4:55 pm

Which do you like for gold jewelry? - Chuck the SCOOP guy (Detroit) 7/3/2006, 2:07 pm

Re: Which do you like for gold jewelry? - Rick, N. MI 7/4/2006, 12:22 am

B/H 4'' coil - norm 7/2/2006, 1:51 am

It works on 3300 ?? - bfodnes 7/3/2006, 9:20 am

First Texas told me you don't have to send the 4" coil in ... - Bob D 7/3/2006, 5:32 pm

Re: It works on 3300 ?? - jackintexas 7/3/2006, 12:47 pm

Re: B/H 4'' coil - kck 7/2/2006, 3:25 pm

Re: B/H 4'' coil - Tom (AZ) 7/3/2006, 7:39 am

Anyone try the Lorenz Deepmax? - Tony N 7/1/2006, 12:08 am

Bounty Hunter 4 " Coil - kck 6/30/2006, 10:20 pm

New 4" BH coils for $34.95 including shipping....... - JB(MS) 7/1/2006, 5:21 pm

Re: Bounty Hunter 4 " Coil - Bob D 7/1/2006, 4:14 pm

Re: Bounty Hunter 4 " Coil - Steve(MS) 7/1/2006, 1:45 am

Thanks for your responses, I'm headed to Ebay :) - kck 7/1/2006, 9:29 pm

Compass detector - Bob sw.mo 6/29/2006, 3:59 pm

XP Pro Plus - JB(MS) 6/29/2006, 8:08 pm

Anyone Have a Teknetics Condor - duggr 6/28/2006, 8:48 pm

another pic - duggr 6/28/2006, 8:52 pm

gut me a 3300 - Alan-CA 6/28/2006, 4:25 pm

I took one and camoflauged it - kck 6/29/2006, 11:50 pm

Re: E-Mail FT - Dan-AL. 6/29/2006, 9:10 am

Last I heard on the Pulse Devil - kck 6/27/2006, 6:36 am

pulse devil dealer? - Rybo 7/1/2006, 12:36 am

Re: Last I heard on the Pulse Devil - Carl 6/28/2006, 12:55 am

Re: Last I heard on the Pulse Devil - lawrenzo 6/27/2006, 11:33 pm

What next - Lawrenzo 6/26/2006, 1:15 am

Re: If you look at some of the features out there - Mike Hillis 6/27/2006, 11:15 pm

Re: If you look at some of the features out there - Carl 6/28/2006, 9:51 am

Re: If you look at some of the features out there - FrankP 6/28/2006, 12:38 pm

I see mucho problems with that. - Jbird 6/29/2006, 6:25 pm

Re: I see mucho problems with that. - Carl 6/29/2006, 11:54 pm

Re: I see mucho problems with that. - Mike Hillis 6/29/2006, 11:42 pm

Re: What next - Bob D 6/26/2006, 12:15 pm

Lets face it... - Dan-Pa. 6/26/2006, 10:22 am

Re: What next - jeff@middlesex 6/26/2006, 6:28 am

Re: What next - Tom_in_CA 6/26/2006, 11:15 am

Re: What next - Carl 6/26/2006, 8:13 pm

Re: ah the nostalgia - Tom_in_CA 6/26/2006, 10:18 pm

Re: ah the nostalgia - Brian 6/27/2006, 3:30 am

Re: ah the nostalgia - jackintexas 6/27/2006, 12:33 am

Re: ah the nostalgia - Carl 6/27/2006, 10:27 am

Re: What next... - kck 6/26/2006, 6:46 am

That was the depth doubler I think? - Jerry Talley 6/26/2006, 11:45 pm

Bounty Hunter 3300 - kck 6/25/2006, 10:20 pm

Re: Bounty Hunter 3300 - jackintexas 6/25/2006, 11:11 pm

Re: Great back-up machine - Tom (AZ) 6/27/2006, 8:02 am

looks like a good forum - Beacheye 6/25/2006, 5:26 pm

I did the same Beacheye..... - kck 6/26/2006, 6:49 am

bountyhunter magnum 10'coil - manny 6/25/2006, 2:05 pm

Re: bountyhunter magnum 10'coil - Bob D 6/25/2006, 3:26 pm

" ESTEBAN " are you out there? - Joe(TX) 6/25/2006, 1:03 pm

Pulse Devil is it out yet? - Bob sw.mo 6/22/2006, 12:40 pm

optimum or "sweet" frequency Ref Cache hunting for silverGeorge Payne thoughts - FrankP 6/22/2006, 12:34 pm

Re: optimum or "sweet" frequency Ref Cache hunting for silverGeorge Payne thoughts - Bob Sickler 6/23/2006, 8:49 am

detectors that can "add" money......... - Dig'n in Va. 6/24/2006, 12:28 am

Trying to find a box of coins.....need help - Chuck the SCOOP guy from Detro 6/22/2006, 4:15 pm

Re: Trying to find a box of coins.....need help - Bob Sickler 6/23/2006, 9:01 am

seeing thru a metal can..... - Dig'n in Va. 6/24/2006, 12:43 am

Re: Reason I Got Into Detecting - Dan-AL. 6/30/2006, 11:35 am

Re: Reason I Got Into Detecting - Dan-AL. 6/30/2006, 11:50 am

Re: Trying to find a box of coins.....need help - Wayne/TX 6/22/2006, 11:01 pm

Re: optimum or "sweet" frequency Ref Cache hunting for silverGeorge Payne thoughts - JB(MS) 6/22/2006, 3:34 pm

Re: optimum or "sweet" frequency Ref Cache hunting for silverGeorge Payne thoughts - FrankP 6/22/2006, 3:40 pm

Supprise machine, - jim s 6/20/2006, 12:01 am

Tejon with the 10"X12" DD coil. - Old California 6/20/2006, 9:07 am

Re: Tejon with the 10"X12" DD coil. - mehdi 7/28/2006, 7:47 am

Re: Tejon with the 10"X12" DD coil. - jim s 6/20/2006, 10:50 am

Re: Supprise machine, - FrankP 6/20/2006, 7:14 am

Re: Supprise machine, - jim s 6/20/2006, 11:00 am

Re: Supprise machine, - Old California 6/20/2006, 4:36 pm

Nasty Paul, thats nasty, N/T - jim s 6/21/2006, 10:48 pm

Whats going on with Compass? - duggr 6/19/2006, 11:04 pm

Re: Whats going on with Compass? - JoeR 6/20/2006, 9:03 pm

They are about the same in Iron. - crazyman 6/20/2006, 9:34 pm

Maybe FIrst Texas will buy them up? - Bob D 6/20/2006, 2:49 pm

All good things must come to an end I guess. - crazyman 6/20/2006, 11:00 am

Re: Whats going on with Compass? - Wayne/TX 6/20/2006, 10:15 am

Wilson Coin Select - Esteban 6/19/2006, 9:17 am

Re: Wilson Coin Select - kaustin 6/19/2006, 10:37 am

Re: Wilson Coin Select - jackintexas 6/19/2006, 11:39 am

Re: Wilson Coin Select - kaustin 6/19/2006, 9:23 pm

Re: Wilson Coin Select - jackintexas 6/19/2006, 9:50 pm

3300 - bfodnes 6/20/2006, 3:28 pm

Re: 3300 - jackintexas 6/21/2006, 10:20 pm

Thanks N/T - bfodnes 6/22/2006, 4:44 pm

Re: Wilson Coin Select - Esteban 6/19/2006, 12:22 pm

Re: Wilson Coin Select - jackintexas 6/19/2006, 7:15 pm

Re: Wilson Coin Select - Esteban 6/19/2006, 8:27 pm

Re: Wilson Coin Select - Wayne/TX 6/20/2006, 10:21 am

Re: Wilson Coin Select - Esteban 6/20/2006, 11:30 am

Re: Wilson Coin Select - Ron Tindall 6/20/2006, 6:54 pm

Re: Wilson Coin Select - Esteban 6/21/2006, 10:04 am

Need an honest recommendation.... please! - John N 6/18/2006, 12:13 pm

Re: Need an honest recommendation.... please! - Mr. Bill 6/19/2006, 8:58 am

Re: Need an honest recommendation.... please! - Jbird! 6/19/2006, 6:46 pm

Re: Need an honest recommendation.... please! - Tom NW MI 6/19/2006, 7:36 am

The X5 will do the trick, but it's not being sold anymore - Gary (Cen FL) 6/21/2006, 5:08 pm

Re: Need an honest recommendation.... please! - Jbird! 6/18/2006, 4:25 pm

tabs and bottle tops - bob n. 6/18/2006, 1:36 pm

Re: Need an honest recommendation.... please! - JB(MS) 6/18/2006, 12:43 pm

Re: Need an honest recommendation.... please! - Carl 6/18/2006, 12:26 pm

Re: Need an honest recommendation.... please! - John N 6/18/2006, 10:05 pm

Re: Need an honest recommendation.... please! - Carl 6/19/2006, 12:56 am

Re: Need an honest recommendation.... please! - FrankP 6/19/2006, 7:22 am

Re: Need an honest recommendation.... please! - FrankP 6/19/2006, 7:30 am

Cache test - Carl-NC 6/17/2006, 11:27 pm

Minelab SD GP series - Seeker (ak) 6/18/2006, 11:58 am

CARL - duggr 6/17/2006, 11:54 pm

Re: 2-box - Bob sw.mo 6/18/2006, 4:11 am

Re: 2-box - Carl-NC 6/18/2006, 9:33 am

Re: Makes Sense - Dan-AL. 6/18/2006, 5:13 am

Any one have a 8" Bounty Hunty Coil - KCK 6/17/2006, 1:20 am

Re: Any one have a 8" Bounty Hunty Coil - duggr 6/17/2006, 7:19 pm

Re: Any one have a 8" Bounty Hunty Coil - KWills 6/20/2006, 9:16 am

Re: Any one have a 8" Bounty Hunty Coil - kck 6/24/2006, 11:20 pm

Tejon, T-2 and 3300 depth comparison, All did well. - Old California 6/15/2006, 11:55 pm

Re: Tejon, T-2 and 3300 depth comparison, All did well. - FrankP 6/19/2006, 9:33 am

Re: Tejon, T-2 and 3300 depth comparison, All did well. - Lawrenzo 6/16/2006, 11:25 am

Was the 3300 tuned for the 10" coil? - BobD 6/16/2006, 8:51 am

Re: Was the 3300 tuned for the 10" coil? - jim s. 6/16/2006, 12:35 pm

Re: Tejon, T-2 and 3300 depth comparison, All did well. - FrankP 6/16/2006, 7:03 am

Re: Tejon, T-2 and 3300 depth comparison, All did well. - jim s. 6/16/2006, 7:46 am

Re: Surpring & Nice Comparison - Dan-AL. 6/16/2006, 10:53 am

Re: T2 & Tejon Are Ones I've Been Looking At - Dan-AL. 6/16/2006, 10:56 am

Re: T2 & Tejon Are Ones I've Been Looking At - jim s. 6/16/2006, 12:47 pm

Re: T2 & Tejon Are Ones I've Been Looking At - Dan-AL. 6/16/2006, 2:27 pm

We've all had detecting outings that had a humorous side, how about posting some of them....... - JB(MS) 6/15/2006, 8:43 pm

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - Terry Bradley 6/25/2006, 12:32 pm

The day i found tw0 hundred & eighty dollars, - Old California 6/18/2006, 6:39 pm

Ahh Paul, ever the gentleman - Rudy 6/23/2006, 9:51 pm

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - Lawrenzo 6/18/2006, 12:16 am

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - Jeff England 6/19/2006, 10:05 am

just curious: - Tom_in_CA 6/18/2006, 8:54 am

Re: just curious: - Lawrenzo 6/18/2006, 11:22 am

Re: here's one: - Tom_in_CA 6/16/2006, 9:51 am

Had that happen a couple of times..... - JB(MS) 6/16/2006, 8:27 pm

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - Dan-Pa. 6/16/2006, 8:53 am

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - jim s. 6/16/2006, 12:53 pm

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - jim s. 6/15/2006, 11:02 pm

Speaking of two way radios........... - JB(MS) 6/16/2006, 8:06 pm

Re: Speaking of two way radios........... - jim s. 6/16/2006, 8:35 pm

Re: We've all had detecting outings that had a humorous side, how about posting some of them....... - duggr 6/16/2006, 7:34 pm

This didn't happen to me but... - eddiecurrent 6/15/2006, 9:07 pm

White Spectrum XLT won't power up - Stephen D 6/15/2006, 7:41 pm

Re: Try Alternate Battery - Dan-AL. 6/16/2006, 12:17 am

Re: White Spectrum XLT won't power up - BobD 6/15/2006, 9:03 pm

Re: White Spectrum XLT won't power up - Stephen D 6/15/2006, 9:05 pm

Re: White Spectrum XLT won't power up - Paul WV 6/15/2006, 7:50 pm

Re: White Spectrum XLT won't power up - Stephen D 6/15/2006, 8:40 pm

Re: White Spectrum XLT won't power up - Dan-Pa. 6/16/2006, 8:43 am

Mark-1 LTD on ebay - duggr 6/15/2006, 1:42 pm

IH Penny found - Paul WV 6/15/2006, 8:18 am

Re: IH Penny found - Tom_in_CA 6/15/2006, 12:31 pm

Using the GoldScan 5 for relic hunting, - Old California 6/14/2006, 11:14 pm

Re: Oh by the way, I call my six inch coil.. - Tex Kinsey 6/16/2006, 3:30 pm

Re:I just got the 6" and man will it run smooth and stable - Tex Kinsey 6/16/2006, 3:23 pm

Re: Using the GoldScan 5 for relic hunting, - FrankP 6/16/2006, 7:15 am

Re: Using the GoldScan 5 for relic hunting, - bakergeol 6/15/2006, 9:32 pm

Don't you have a GoldScan 5? - Old California 6/15/2006, 11:20 pm

Yes I do - bakergeol 6/16/2006, 9:35 am

Re: Using the GoldScan 5 for relic hunting, - Tex Kinsey 6/15/2006, 1:12 pm

Minelab GP/SD coils, - Old California 6/15/2006, 11:03 pm

What is all this talk about the 3300..hehehhe - KCK 6/14/2006, 9:04 pm

Re: What is all this talk about the 3300..hehehhe - jim s. 6/14/2006, 10:17 pm

Re: What is all this talk about the 3300..hehehhe - Mark W 6/15/2006, 8:51 am

3300 & gold jewelry supprise, - jim s. 6/13/2006, 12:13 pm

I see a difference in the coils, - Old California 6/13/2006, 8:56 pm

Here's a pic of the coils used on the 3300, - Old California 6/13/2006, 9:01 pm

Re: Here's a pic of the coils used on the 3300, - FrankP 6/14/2006, 12:45 pm

Re: Here's a pic of the coils used on the 3300, - jim s. 6/14/2006, 1:55 pm

Re: Here's a pic of the coils used on the 3300, - Old California 6/14/2006, 1:52 pm

Re: Here's a pic of the coils used on the 3300, - Lawrenzo C.P. Manza 6/13/2006, 10:38 pm

Here is a link and instructions. - Old California 6/13/2006, 11:52 pm

Re: Here's a pic of the coils used on the 3300, - jim s. 6/13/2006, 9:42 pm

Re: Here's a pic of the coils used on the 3300, - Carl 6/14/2006, 1:48 pm

Nickels and the 3300.... - jbms@jb-ms.com 6/14/2006, 3:55 pm

Re: Here's a pic of the coils used on the 3300, - jim s. 6/14/2006, 1:51 pm