Metal Detecting Equipment

Metal Detecting Equipment
[ Post a Message |Archives ]

User comments and opinions are welcomed here. This site is not sponsored by any dealer or manufacturer of detecting equipment. Everyone is encouraged to speak out in a responsible manner expressing both good and bad experiences with any make, model or brand detector or accessory. Our mission is to increase the knowledge base of all readers by sharing our collective insight and to provide sound advice without editorial bias.

We like George even though - jim searcy 1/28/2004, 8:28 am

Compass 77B metal detector - Stanley Santiago 1/28/2004, 1:02 am

OK! I'm starting to see why the Goldtrax will do well as a gold jewelry detector. Here's a picture - Paul (Ca) 1/27/2004, 11:11 pm

WTG Paul, glad to see - jim searcy 1/28/2004, 8:17 am

question for George Payne - Jerry winburn 1/27/2004, 7:13 pm

Re: question for George Payne - Tom_in_CA 1/27/2004, 10:33 pm

Re: question for George Payne - Carl-NC 1/27/2004, 9:42 pm

Re: question for George Payne - George Payne 1/28/2004, 11:42 am

Re: question for George Payne - Jerry Winburn 1/28/2004, 5:02 pm

Re: question for George Payne - Beachcomber 1/27/2004, 9:27 pm

cleaning - Marc/Tucson 1/27/2004, 10:14 am

Re: cleaning - Bob sw.mo 1/27/2004, 1:01 pm

Which ever bubbles... - Kevin 1/27/2004, 12:47 pm

Re: Which ever bubbles... - Marc/Tucson 1/27/2004, 3:13 pm

Should I or shouldn't I... - Tom NW MI 1/27/2004, 6:51 am

Tom, I think the MXT was the last detector to pull a coin there, an IH. - Rick, N. MI 1/27/2004, 7:22 pm

You're right Rick - Tom NW MI 1/28/2004, 6:04 am

Tesoro Tejon..... - Wayne/TX 1/27/2004, 11:41 am

Re: Tesoro Tejon....single freq machines. - Tom NW MI 1/28/2004, 6:23 am

Baron set-up for fast low conductor recovery - Paul (Ca) 1/26/2004, 12:23 am

Goldtrax stuff - Jbird 1/26/2004, 4:47 pm

Great information Jbird.... - Paul (Ca) 1/26/2004, 8:06 pm

Re: Great information Jbird.... - JB(MS) 1/26/2004, 10:18 pm

Re: Great information Jbird.... - Paul (Ca) 1/27/2004, 8:40 pm

Speaking of air testing.... - Kevin 1/27/2004, 10:20 pm

Its seriously cold here (-45c) - Paul (Ca) 1/27/2004, 11:23 pm

Hey Kevin....Brrrrrrr....thats cold!! - Jbird 1/28/2004, 11:52 am

Re: Its seriously cold here (-45c) - Kevin 1/28/2004, 2:25 am

Re: Its seriously cold here (-45c) - Paul (Ca) 1/28/2004, 6:44 am

Coil choice - Jbird 1/26/2004, 10:08 pm

Reg sniff wrote an article on the Goldtrax - Paul (Ca) 1/27/2004, 8:48 pm

Try this Paul on tr. barron - Bob sw.mo 1/27/2004, 10:29 pm

Thanks Bob and Kevin.. - Paul (Ca) 1/28/2004, 6:46 am

Here ya go - Kevin 1/27/2004, 10:22 pm

Re: Baron set-up for fast low conductor recovery - Carl 1/26/2004, 2:48 am

Re: Baron set-up for fast low conductor recovery - Paul (Ca) 1/26/2004, 6:41 am

Interesting Paul - Seeker 1/26/2004, 8:21 am

Thanks Geo,,, - Paul (Ca) 1/26/2004, 8:21 pm

Question for George Payne/Others: Tek Product - Phil 1/25/2004, 3:27 pm

Manual - Kevin 1/27/2004, 12:50 pm

Re: Manual - Phil 1/27/2004, 4:57 pm

Re: Question for George Payne/Others: Tek Product - George Payne 1/25/2004, 5:53 pm

Re: Question for George Payne/Others: Tek Product - Phil 1/25/2004, 6:58 pm

Keith Wills can fix it - Bob sw.mo 1/25/2004, 8:35 pm

Re: Question for George Payne/Others: Tek Product - George Payne 1/25/2004, 8:30 pm

Re: Question for George Payne/Others: Tek Product - Phil 1/25/2004, 11:42 pm

Re: Question for George Payne/Others: Tek Product - George Payne 1/26/2004, 11:19 am

Keeping memory on treasure baron coin trax? - Paul WV 1/25/2004, 3:24 pm

Re: Keeping memory on treasure baron coin trax? - George Payne 1/25/2004, 5:21 pm

Re: Keeping memory on treasure baron coin trax? - Paul WV 1/26/2004, 12:17 pm

Re: New CoinTrax Chip? - George Payne 1/26/2004, 6:14 pm

Re: New CoinTrax Chip? - Paul WV 1/26/2004, 6:38 pm

Well Done George !! :) - seeker 1/26/2004, 8:59 pm

Goldtrax-gold and all metal iron ID - JB(MS) 1/24/2004, 4:55 pm

Re: Thats a nice bracelet - Bob in ms 1/25/2004, 1:12 pm

Im sure surprised to hear that. - Jbird 1/25/2004, 12:16 pm

Think you're right Jbird - JB(MS) 1/25/2004, 3:30 pm

Umm Yes, Kemosabe, Goldtrax speak'um with straight tongue. - Jbird 1/25/2004, 10:09 pm

Re: Goldtrax-gold and all metal iron ID - Paul (Ca) 1/24/2004, 5:53 pm

Manual - JB(MS) 1/24/2004, 6:15 pm

It worked!! Thanks JB, - Paul (Ca) 1/25/2004, 7:13 am

One more thing JB, - Paul (Ca) 1/25/2004, 7:29 am

CZ-3D...have I missed something? - Beachcomber 1/23/2004, 11:39 pm

Re: I`ll stick to my cz5. nothing tempting me! :) - Bob in ms 1/25/2004, 1:15 pm

Re: CZ-3D...have I missed something? - Carl 1/24/2004, 1:31 pm

Re: CZ-3D...have I missed something? - Brian 1/24/2004, 9:10 am

Re-visit to Lucky Ridge - Jbird 1/21/2004, 6:08 pm

Re: Re-visit to Lucky Ridge - jim searcy 1/24/2004, 7:36 am

Re: Re-visit to Lucky Ridge - Marc/Tucson 1/23/2004, 8:39 am

Re: Re-visit to Lucky Ridge - JB(MS) 1/22/2004, 3:30 pm

Re: Re-visit to Lucky Ridge - Paul (Ca) 1/21/2004, 11:58 pm

Spirit finds only dirt on Mars! - Jbird 1/20/2004, 10:41 pm

Re: Spirit finds only dirt on Mars! - Wayne/TX 1/21/2004, 11:32 am

You have given me hope Wayne.. - Jbird 1/21/2004, 3:59 pm

Super! Save room for me too? - Wayne/TX 1/22/2004, 2:07 am

EM31 owner needed to assist in VA - Toki 1/19/2004, 5:42 am

Recent finds and pics of friends airplane hot-dog stand.. - Paul (Ca) 1/18/2004, 8:56 pm

Re: Very good story Paul. enjoyed it! - Bob in ms 1/19/2004, 5:38 pm

Thanks Bob, They did a great job converting it over to a hot-dog diner. :) - Paul (Ca) 1/19/2004, 9:35 pm

Re: Welcome :) - Bob in ms 1/19/2004, 11:06 pm

That's really neat - JB(MS) 1/19/2004, 3:25 pm

Rolex watch? - Paul (Ca) 1/19/2004, 9:40 pm

Re: Recent finds and pics of friends airplane hot-dog stand.. - Jbird 1/18/2004, 11:42 pm

Not quite.... - Kevin 1/19/2004, 11:02 am

Re: Not quite.... - Tom NW MI 1/20/2004, 6:24 am

Thanks Kevin, I didn't know you worked on airplanes? - Paul (Ca) 1/19/2004, 9:45 pm

Well.......... - Jbird 1/19/2004, 4:57 pm

Re: Recent finds and pics of friends airplane hot-dog stand.. - Paul (Ca) 1/19/2004, 6:32 am

CZ-3D - JB(MS) 1/17/2004, 5:23 pm

Re: CZ-3D - Carl 1/18/2004, 2:47 pm

Re: CZ-3D - JB(MS) 1/18/2004, 5:18 pm

Re: CZ-3D - Ty 1/19/2004, 10:37 am

Re: CZ-3D - JB(MS) 1/19/2004, 9:23 pm

Re: CZ-3D - Carl 1/19/2004, 2:48 am

Re: CZ-3D - JB(MS) 1/19/2004, 9:01 pm

Re: CZ-3D - Mr. Bill 1/18/2004, 9:14 am

Re: CZ-3D - Tom NW MI 1/18/2004, 6:07 am

Woops! - Tom NW MI 1/18/2004, 7:18 am

Re: CZ-3D - Bob in ms 1/17/2004, 6:23 pm

Re: CZ-3D - bob n. 1/18/2004, 8:35 am

This evening - Bob in ms 1/16/2004, 9:25 pm

Nice finds Bob, and - JB(MS) 1/17/2004, 4:21 pm

Re: Nice finds Bob, and - Bob in ms 1/17/2004, 6:20 pm

Re: oop`s - Bob in ms 1/16/2004, 9:28 pm

Re: oop`s - Carl 1/18/2004, 2:51 pm

Nice pic! - Paul (Ca) 1/16/2004, 10:59 pm

opps! Here's what I meant to say :) - Paul (Ca) 1/16/2004, 11:02 pm

Re: No problem, thanx - Bob in ms 1/16/2004, 11:12 pm

Yeah Bob - Jbird 1/16/2004, 11:41 pm

JB's stash :) - Paul (Ca) 1/17/2004, 6:58 am

Re: I`ll have to say,, you guys know him - Bob in ms 1/17/2004, 8:57 am

I need the jumper pic that shows where the jumpers go when removing the Deep hunter - Scott Me 1/15/2004, 2:02 pm

Here's a pic of the jumper set-up - Paul (Ca) 1/16/2004, 10:50 pm

That's it..thanks Paul. - Scott Me. 1/19/2004, 9:08 am

Re: I need the jumper pic that shows where the jumpers go when removing the Deep hunter - RD, Indio 1/15/2004, 2:16 pm

Bounty Hunter Test - JB(MS) 1/13/2004, 8:05 pm

Re: Bounty Hunter Test - John - Al. 1/17/2004, 11:06 pm

Great read JB - Kevin 1/15/2004, 2:41 pm

Re: Bounty Hunter Test - Marc/Tucson 1/15/2004, 9:42 am

I Used My Bud Pro - Seeker (ak) 1/14/2004, 8:52 pm

Re: Bounty Hunter Test - Scott Me 1/14/2004, 5:47 pm

Re: Bounty Hunter Test - JB(MS) 1/14/2004, 6:42 pm

Re: Bounty Hunter Test - Scott me 1/14/2004, 7:15 pm

Re: Bounty Hunter Test - Jbird 1/14/2004, 8:34 pm

Have you ever used a Wilson Relic and Coin IV - Scott Me. 1/14/2004, 9:37 pm

Re: Have you ever used a Wilson Relic and Coin IV - Jbird 1/14/2004, 10:35 pm

Re: Have you ever used a Wilson Relic and Coin IV - Scott Me. 1/15/2004, 9:47 am

Re: Bounty Hunter Test - Carl 1/14/2004, 9:10 pm

Same here - JB(MS) 1/14/2004, 8:59 pm

Good Work as usual, JB - Jbird 1/13/2004, 11:54 pm

Pretty much the same package - JB(MS) 1/14/2004, 4:38 pm

Very well done!... - ArtWI 1/13/2004, 10:51 pm

Re: Very well done!... - JB(MS) 1/14/2004, 4:48 pm

Re: Bounty Hunter Test - Bob in ms 1/13/2004, 10:18 pm

need info. on Quester 55 detector--- - CLARK 1/10/2004, 9:12 pm

tthanks for info.---HH ! - CLARK 1/11/2004, 11:24 am

Re: need info. on Quester 55 detector--- - BOB SW.MO 1/11/2004, 6:47 am

Re: need info. on Quester 55 detector--- - Bob sw.mo. 1/11/2004, 6:43 am

Re: need info. on Quester 55 detector--- - Jbird 1/17/2004, 4:21 pm

Re: need info. on Quester 55 detector--- - Bob sw.mo 1/17/2004, 10:30 pm

I went thing with Allan Hammetta - Tom 1/17/2004, 2:19 pm

Stories are good.......... - Jbird 1/17/2004, 4:17 pm

My treasure hunt with Allan Hammetta - Tom 1/17/2004, 6:02 pm

I'll take a wild guess... - Carl-NC 1/18/2004, 9:51 am

Re: I'll take a wild guess... - Tom 1/18/2004, 3:40 pm

Well Tom..Stories are OK but...... - Jbird 1/17/2004, 10:05 pm

Intex systems is next town over.. - Tom 1/18/2004, 1:59 am

They have a Quintron... - Tom 1/18/2004, 2:20 am

Re: need info. on Quester 55 detector--- - Jbird 1/11/2004, 4:41 am

Just Visiting - Harry 1/10/2004, 12:27 am

Hey Harry - JB(MS) 1/11/2004, 7:04 pm

Re: Just Visiting - Carl 1/11/2004, 11:44 am

Winter time Research...Follow the Natural Resources - Jbird 1/9/2004, 7:22 am

Great post but... - Beachcomber 1/10/2004, 2:06 am

I found iron, Beach, and...... - Jbird 1/10/2004, 7:01 pm

Re: I found iron, Beach, and...... - Beachcomber 1/11/2004, 11:34 am

Excellent Post Jbird! - JB(MS) 1/9/2004, 7:27 pm

Very True - Seeker 1/9/2004, 9:31 am

Re: Very True - Jbird 1/9/2004, 8:23 pm

Never Got To Meet - Seeker 1/9/2004, 9:21 pm

question for george payne or anyone else--- - clark 1/8/2004, 9:11 am

thanks guys for info.---one more question--- - clark 1/8/2004, 5:42 pm

Re: question for george payne or anyone else--- - Reg 1/8/2004, 5:35 pm

Re: question for george payne or anyone else--- - Bob sw.mo 1/8/2004, 5:06 pm

George Payne question? - Tom 1/6/2004, 11:44 pm

Re: George Payne question? - George Payne 1/7/2004, 1:10 pm

Lets Share first detecting experience's (long) - Jbird 1/6/2004, 2:03 am

How I got into detecting - Carl 1/11/2004, 1:03 pm

Re: Lets Share first detecting experience's (long) - Marc/Tucson 1/8/2004, 10:18 am

Re: oop's sorry guy's - Marc/Tucson 1/9/2004, 1:02 am

Re: Very good! enjoyed those stories guys!! :) n/t - Bob in ms 1/7/2004, 10:17 pm

First Trip & JB.s Photo - Seeker (ak) 1/7/2004, 8:40 pm

Re: First Trip & JB.s Photo - Carl 1/8/2004, 11:34 pm

Razor blades - Jbird 1/8/2004, 12:31 am

Re: Lets Share first detecting experience's (long) - Tom_in_Salinas_CA 1/7/2004, 4:14 am

First hunt - JB(MS) 1/6/2004, 6:54 pm

JB, I got tears - Carl 1/8/2004, 11:44 pm

Hunting the BIG one.... - Jbird 1/8/2004, 12:14 am

Re: Hunting the BIG one.... - JB(MS) 1/8/2004, 6:21 pm

It would probably take hypnosis to reveal.. - Tom NW MI 1/6/2004, 11:58 am

24 Inch Vacuum Forming Machine - Charles (Upstate NY) 1/4/2004, 4:23 pm

Really professional work. - Jbird 1/6/2004, 8:11 pm

Re: 24 Inch Vacuum Forming Machine - jim searcy 1/5/2004, 9:13 am

Re: 24 Inch Vacuum Forming Machine - Charles (Upstate NY) 1/7/2004, 3:01 pm

Re: 24 Inch Vacuum Forming Machine - Lammy 1/16/2004, 4:06 pm

Anyone have/had a QUESTER 55 Detector? - Bob D (sw.mo. 1/3/2004, 5:10 pm

Different Coils? - Paul WV 1/3/2004, 3:51 pm

Re: Different Coils? - Marc/Tucson 1/3/2004, 5:39 pm

Re: Different Coils? - Paul WV 1/3/2004, 8:35 pm

Shouldn't Make anty Difference - seeker 1/3/2004, 4:46 pm

Memory Map 2004 3D - Rob 1/3/2004, 10:13 am

question about search coil------------ - clark 1/3/2004, 9:09 am

Last find of 2003 - JB(MS) 1/1/2004, 11:19 am

Nice way to end the year!! - Jbird 1/2/2004, 5:01 pm

Nice bracelet JB - Tom NW MI 1/1/2004, 8:15 pm

2004 - JB(MS) 12/31/2003, 6:14 pm

Happy New Year All !! Its a Tough Road to Town - Seeker (ak) 12/31/2003, 10:08 pm

Same to you - Kevin 12/31/2003, 6:57 pm

:Ditto! - Jbird 12/31/2003, 8:25 pm

Pics of a couple of Ca. beach cuts - Paul (Ca) 12/31/2003, 12:30 pm

Thats a pretty deep cut. - Jbird 12/31/2003, 5:44 pm

Re: Thats a pretty deep cut. - Paul (Ca) 12/31/2003, 9:42 pm

Yeah! Beep trouble. - jim searcy 1/1/2004, 12:50 am

Select 220 circuit BD for Marc - David 12/31/2003, 2:33 am

Re: Select 220 circuit BD for Marc - Marc/Tucson 12/31/2003, 11:35 am

Question for George Payne - Marc/Tucson 12/30/2003, 10:10 am

Re: Question for George Payne - George Payne 12/31/2003, 12:25 pm

Re: Question for George Payne - Marc/Tucson 12/31/2003, 3:42 pm

Got a new field of dreams. - Jbird 12/29/2003, 9:01 pm

Day one hunt. - Jbird 12/30/2003, 8:31 pm

Will be waitin for the reports from "lucky ridge" - Tom NW MI 12/30/2003, 5:18 pm

Re: Got a new field of dreams. - Marc/Tucson 12/30/2003, 11:55 am

About how far - JB(MS) 12/29/2003, 10:16 pm

I'm a Texan... - Paul (Ca) 12/29/2003, 9:49 pm

Hi Tex. - Jbird 12/29/2003, 10:26 pm

Red Mule and a trip to the old cat house.. - Paul (Ca) 12/29/2003, 11:05 pm

anyone know of any new detectors coming out ?---- - clark 12/28/2003, 6:17 pm

What about the new Excalibur? - Tom 1/6/2004, 11:53 pm

I heard that rumor, too - Carl 1/8/2004, 11:55 pm

Re: anyone know of any new detectors coming out ?---- - Brian 12/29/2003, 9:16 am

Re: anyone know of any new detectors coming out ?---- - Rick, N. MI 12/28/2003, 7:35 pm

Re: anyone know of any new detectors coming out ?---- - JB(MS) 12/28/2003, 8:50 pm

How Accurate.......... - Jbird 12/28/2003, 9:35 pm

Re: How Accurate.......... - JB(MS) 12/28/2003, 10:50 pm

Some wrong info - JB(MS) 12/28/2003, 10:59 pm

Re: Some wrong info - Marc/Tucson 12/31/2003, 12:03 pm

Posting Photos - JB(MS) 1/1/2004, 9:39 am

Re: Posting Photos - Marc/Tucson 1/2/2004, 8:06 pm

Aquestion for George Payne - Dave Emery 12/27/2003, 7:52 pm

Re: Aquestion for George Payne - George Payne 12/31/2003, 2:57 pm

Re: Aquestion for George Payne - Dave Emery 1/1/2004, 11:07 pm

Re: Aquestion for George Payne - George Payne 1/2/2004, 3:16 pm

Re: Aquestion for George Payne - Reg 12/30/2003, 1:47 am

Re: Aquestion for George Payne - Dave Emery 12/30/2003, 2:08 am

looks like george went fishing ! - clark 12/29/2003, 9:13 pm

gold gun - La. Bill 12/27/2003, 3:49 pm

I have a my Millenium Baron for sale - Paul WV 12/27/2003, 2:32 pm

Re: I have a my Millenium Baron for sale - Marc/Tucson 12/30/2003, 10:17 am

Re: try this - Paul WV 12/30/2003, 8:17 pm

Re: try this - Marc/Tucson 12/30/2003, 10:53 pm

Do you know why Women can't judge distance? - jim searcy 12/26/2003, 8:42 am

You mean they're not???? - JB(MS) 12/26/2003, 6:03 pm

Re: You mean they're not???? - t 12/27/2003, 8:31 am

Doggone it Tom - JB(MS) 12/27/2003, 11:02 am

Me guilty as charged. Bad Tom! :) n/t - Tom NW MI 12/27/2003, 2:29 pm

No problems Tom - JB(MS) 12/27/2003, 5:05 pm

They are in my house. - jim searcy 12/26/2003, 9:21 pm

PLEA for HELP - Sean Goddard 12/26/2003, 7:10 am

Re: PLEA for HELP - Robby 12/26/2003, 8:08 pm

Twas the Night Before Christmas. - Carl 12/24/2003, 11:00 pm

You're right Carl!! - Paul (Ca) 12/28/2003, 10:21 am

Remember........ - Ralph 12/24/2003, 10:58 pm

Amen......Thank you Ralph.......What Christmas is all about. n/t - Rick, N. MI 12/25/2003, 12:08 am

Thanks for visiting this forum. Please tell your detecting friends to stop by.