Metal Detecting Equipment

Metal Detecting Equipment

HAS ANYONE NOTICED ---- - CLARK 11/19/2007, 8:21 pm

........ARE GOING AFTER CHEAP KID DETECTORS--DETECTORS THAT SELL FOR UNDER $300 - Andy,NM 11/20/2007, 10:08 pm
- Re: ........ARE GOING AFTER CHEAP KID DETECTORS--DETECTORS THAT SELL FOR UNDER $300 - Carl 11/21/2007, 1:35 am
- Yep.................It's a race to the bottom, thanks Garrett. - John N 11/21/2007, 12:40 am
  - It didn't hurt that - Tom NWMI 11/21/2007, 5:09 pm
    - Re: It didn't hurt that - Andy,NM 11/21/2007, 5:48 pm
Re: HAS ANYONE NOTICED ---- - Carl 11/19/2007, 9:27 pm
- Re: haha - Tom_in_CA 11/19/2007, 10:37 pm
Wal-Mart made First Texas - Tom (AZ) 11/19/2007, 8:55 pm
- Besides That - Seeker 11/20/2007, 12:15 pm
  - Re: Besides That - Carl 11/20/2007, 7:55 pm
    - I think First Texas may be - George (MN) 11/21/2007, 5:49 pm
      - Re: I think First Texas may be - Carl 11/21/2007, 7:02 pm
    - Have you looked at - AndyS 11/21/2007, 7:02 am
      - Re: Garrett Made In USA - John - Edmonton 11/21/2007, 1:25 pm
        
        Re: Garrett Made In USA - jackintexas 11/21/2007, 10:16 pm
        
        Your missing the point - AndyS Yesterday, 7:32 am
      - Re: Have you looked at - Carl 11/21/2007, 11:01 am
        
        Re: Have you looked at - jackintexas 11/21/2007, 10:18 pm

FOREIGN MADE DETECTORS QUESTION ---- - CLARK 11/18/2007, 11:58 am

I disagree on both counts. - Mike Hillis 11/19/2007, 1:12 am
- Learn from the Chinese - Arthur-Canada 11/19/2007, 9:33 pm
- Re: I disagree on both counts. - Brian 11/19/2007, 10:59 am
  - Thanks for the list, Brian. - Mike Hillis 11/19/2007, 10:34 pm
    - Re: Thanks for the list, Brian. - Brian 11/20/2007, 5:46 am
- Re: I disagree on both counts. - Daniel 11/19/2007, 10:34 am

Fisher CZ-21 - Carl 11/17/2007, 8:18 pm

Re: Fisher CZ-21 - JB(MS) 11/19/2007, 4:09 pm
- Re: Fisher CZ-21 - Steve Herschbach 11/19/2007, 4:13 pm
  - re: PB GB - willy 11/20/2007, 11:58 am
    - Re: re: PB GB - jackintexas 11/20/2007, 9:56 pm

NEW DETECTORS FOR XMAS ???? - CLARK 11/17/2007, 9:57 am

Seems like they have..... - Beachcomber 11/18/2007, 5:37 pm
- I REALLY BELIEVE THAT---- - CLARK 11/18/2007, 6:35 pm
  - Re: So how reliable is that about ML coming out with a disc. PI? NT - Steve(MS) 11/20/2007, 1:51 am
    - I HEARD FROM THE ----- - CLARK 11/20/2007, 4:00 pm
    - It has alreadybeen released - Steve Herschbach 11/20/2007, 12:58 pm
  - Re: I REALLY BELIEVE THAT---- - lawrenzo 11/18/2007, 8:54 pm
    - Re:Whites is not going anywhere, - George Kinsey 11/19/2007, 3:45 pm
      - Geo. You hit the nail on the head. - AndyS Yesterday, 7:47 am
    - Re: I REALLY BELIEVE THAT---- - Beachcomber 11/18/2007, 9:58 pm
      - The only problem with Minelab.. - willy 11/19/2007, 12:16 pm
        
        I think that is waht most people..... - Beachcomber 11/19/2007, 5:00 pm
Re: NEW DETECTORS FOR XMAS ???? - John-Edmonton 11/17/2007, 2:28 pm
Re: NEW DETECTORS FOR XMAS ???? - George Kinsey 11/17/2007, 11:23 am

ADONIS DETECTOR----- - CLARK 11/16/2007, 10:46 am

Re: ADONIS DETECTOR----- - doug 11/16/2007, 8:07 pm
Re: ADONIS DETECTOR----- - Bjorn 11/16/2007, 11:35 am

A Link To Field Tests Of Most Detectors - John - Edmonton 11/14/2007, 11:10 am

I clicked one of them and it is in German, nice to have but I can barely speak english, LOL - Jerry Talley 11/18/2007, 11:50 am
- Re: I clicked one of them and it is in German, nice to have but I can barely speak english, LOL - John - Edmonton 11/18/2007, 3:01 pm
Re: A Link To Field Tests Of Most Detectors - yonic 11/15/2007, 9:24 pm
Thanks John! - Tom NWMI 11/15/2007, 5:23 pm

Thanks for an interesting forum - doug 11/14/2007, 1:03 am

Re: Thanks for an interesting forum - Carl 11/14/2007, 8:27 am

Positive or negative user specified auto ground balance tracking? - Sean 11/13/2007, 9:49 pm

Re: Positive or negative user specified auto ground balance tracking? - George (MN) 11/14/2007, 5:56 pm
- despite thousands of adjustment combinations - Sean 11/14/2007, 6:41 pm
Re: Positive or negative user specified auto ground balance tracking? - JB(MS) 11/13/2007, 10:35 pm
- Discovery Treasure Baron Cointrax and Goldtrax both have that feature - Sean 11/14/2007, 12:09 am
  - Re: Discovery Treasure Baron Cointrax and Goldtrax both have that feature - JB(MS) 11/14/2007, 5:51 pm
    - Thanks... - Sean 11/14/2007, 6:35 pm
      - Re: Thanks... - Brian 11/15/2007, 6:05 am
        
        Re: Thanks Brian - Sean 11/15/2007, 10:33 am
        
        Re: Thanks Brian - Brian 11/19/2007, 10:26 am
        
        Excellent Work Brian! - Sean 11/20/2007, 12:33 pm

A Univeral Gold Cache depth test: 6000 di/pro SL - Sean 11/12/2007, 9:55 pm

Re: A Univeral Gold Cache depth test: 6000 di/pro SL - Brian 11/13/2007, 4:12 am
- Re: A Univeral Gold Cache depth test: 6000 di/pro SL - Sean 11/13/2007, 9:17 pm
  - Re: A Univeral Gold Cache depth test: 6000 di/pro SL - Brian 11/14/2007, 4:17 am

THE YEAR FOR P.I. DETECTORS---- - CLARK 11/12/2007, 9:28 pm

Here's an interesting read, Mayan Calendar - Paul (Ca) 11/13/2007, 7:20 pm
Re: December 21, 2012 - PaulWV 11/13/2007, 9:04 am
- Re: December 21, 2012 - CLARK 11/13/2007, 6:55 pm
  - Re: December 21, 2012 - Carl 11/13/2007, 7:41 pm
- Isn't that the year that will be the end of medal detecting as we know it ;) n/t - Beachcomber 11/13/2007, 4:42 pm

IS THESE DETECTORS FOR REAL --- - CLARK 11/11/2007, 4:47 pm

Can't afford a real English translator - Arthur-Canada 11/12/2007, 8:36 pm
Beem me up Scotty - Tom (AZ) 11/11/2007, 9:46 pm
Re: IS THESE DETECTORS FOR REAL --- - Bjorn 11/11/2007, 6:57 pm
- OKM Locating Technology Ltd - Sean 11/11/2007, 8:13 pm
  - Re: OKM Locating Technology Ltd - Carl 11/11/2007, 9:51 pm
    - Re: OKM Locating Technology Ltd - Wayne/TX 11/12/2007, 3:55 am
    - Re: OKM Locating Technology Ltd - John - edmonton 11/11/2007, 11:10 pm
      - Re: OKM Locating Technology Ltd - Brian 11/12/2007, 4:39 am
        
        Re: OKM Locating Technology Ltd - Bjorn 11/12/2007, 11:36 pm
        
        sounds like you ---- - CLARK 11/12/2007, 8:19 pm
        
        Re: sounds like you ---- - Brian 11/13/2007, 3:52 am

Coins in Nails? - PaulWV 11/11/2007, 1:50 pm

PaulWV ... I think you're blending different features into final performance. - Monte 11/12/2007, 1:32 pm
- Re: PaulWV ... I think you're blending different features into final performance. - PaulWV 11/12/2007, 2:49 pm
  - PaulWV .. I better understand what you're asking. - Monte 11/14/2007, 8:57 am
Discrimination level, Set below preset if possible. - Paul (Ca) 11/11/2007, 10:50 pm
- Re: Discrimination level, Set below preset if possible. - PaulWV 11/12/2007, 7:55 am
- Re: Discrimination level, Set below preset if possible. - Brian 11/12/2007, 4:43 am
  - Re: Discrimination level, Set below preset if possible. - Paul (Ca) 11/12/2007, 7:34 am
Re: Coins in Nails? - Tom_in_CA 11/11/2007, 6:51 pm
- Re: Coins in Nails? - PaulWV 11/11/2007, 8:44 pm
  - Re: Coins in Nails? - Tom_in_CA 11/12/2007, 12:26 pm
  - Re: Coins in Nails? - Bob sw.mo 11/11/2007, 9:11 pm

3 detectors w/possible problems, help? - George (MN) 11/10/2007, 6:39 pm

Refund less shipping - George (MN) 11/13/2007, 5:05 pm
- Re: Refund less shipping - Carl-NC 11/15/2007, 9:31 pm
George, don't mean to over simplify but have you taken it to some other location and tested it? - Jerry Talley 11/11/2007, 11:49 am
Re: 3 detectors w/possible problems, help? - Andy,NM 11/10/2007, 9:37 pm
- Re: 3 detectors w/possible problems, help? - George (MN) 11/11/2007, 12:35 am
  - George (MN), I wanted to chaeck out a new F4 to see if it was just a "Bounty Hunter" - Monte 11/11/2007, 6:37 am

Sad news about Vic Fiveash of RedHeat. - DIno - UK 11/10/2007, 12:57 pm

Re: Sad news about Vic Fiveash of RedHeat. - richard 11/12/2007, 6:54 pm
Sorry To Hear About Vic !! - Seeker 11/10/2007, 8:16 pm
O my God - Bjorn 11/10/2007, 1:39 pm

wilson coin and relic series metal detectors - MI(Iowa) 11/10/2007, 11:34 am

Re: wilson coin and relic series metal detectors - Brian 11/12/2007, 4:49 am

George please tell us more.. - Tom NWMI 11/10/2007, 7:50 am

Re: George please tell us more.. - George Kinsey 11/11/2007, 6:18 pm

Tesoro Repairs - Jeff England 11/9/2007, 1:50 pm

Re: Tesoro Repairs - Paul (Ca) 11/10/2007, 12:48 am
Re: Tesoro Repairs - Tom (AZ) 11/9/2007, 5:45 pm

A Univeral Gold Cache depth test. - Sean 11/8/2007, 6:44 pm

Re: A Univeral Gold Cache depth test. - Bjorn 11/10/2007, 12:54 pm
- A Case of Theory VS Practice?? - Sean 11/10/2007, 1:47 pm
  - Re: A Case of Theory VS Practice?? - Bjorn 11/10/2007, 1:57 pm
Re: A Univeral Gold Cache depth test. - Tom_in_CA 11/9/2007, 10:14 am
Re: A Univeral Gold Cache depth test. - john lynn 11/9/2007, 9:49 am
- First to be discriminated is iron ? - Brian 11/12/2007, 5:06 am
- Good to see You john. - Bjorn 11/9/2007, 6:50 pm
  - Re: Good to see You john. - john lynn 11/9/2007, 7:13 pm
    - Re: Good to see You john. - Bjorn 11/10/2007, 4:07 pm
      - Re: Good to see You john. - john lynn 11/10/2007, 9:06 pm
    - Re: Good to see You john. - Bjorn 11/10/2007, 6:08 am
- Good to see you posting here John... - Tom NWMI 11/9/2007, 4:48 pm
  - Re: Good to see you posting here John... - john lynn 11/9/2007, 7:05 pm
    - Re: Good to see you posting here John... - Tom NWMI 11/9/2007, 8:21 pm
      - Re: Good to see you posting here John... - john lynn 11/9/2007, 8:47 pm
- INDUCTANCE PERMEABLITY - Sean 11/9/2007, 11:02 am
  - Re: INDUCTANCE PERMEABLITY - john lynn 11/9/2007, 1:35 pm
    - Universal "bench test" (not field test) - Sean 11/9/2007, 4:26 pm
      - Re: Universal "bench test" (not field test) - Tom_in_CA 11/10/2007, 10:15 am
        
        I can PERFECTLY mimic not only the TID, but the size and mass as well! - Sean 11/14/2007, 6:27 pm
Error in descriptive terms. - Monte 11/9/2007, 5:21 am
- Correction in descriptive terms? - Sean 11/9/2007, 6:03 pm
Re: A Univeral Gold Cache depth test. - Carl 11/8/2007, 9:04 pm
- Theory is correct to a point. Take 3" square of foil, note max depth, roll into tight ball, recheck - Sean 11/8/2007, 11:19 pm
Re: A Univeral Gold Cache depth test. - Daniel 11/8/2007, 8:34 pm
- How do you decide how far down the target will be? - Sean 11/9/2007, 12:16 am

Golden Umax & Electomagnetic interference - Jeff England 11/8/2007, 9:33 am

Re: Golden Umax & Electomagnetic interference - JB(MS) 11/8/2007, 5:42 pm
- Re: Golden Umax & Electomagnetic interference - Carl 11/8/2007, 11:36 pm
  - Re: Golden Umax & Electomagnetic interference - JB(MS) 11/9/2007, 5:16 pm

Which Machine for an $80 gold coin Cache with a microwave tower 1/2 mile away plus Iron trash??? - Sean 11/6/2007, 11:26 pm

White's 6000 di pro with a 15" head will go very deep if you can turn up the signal balance, - Jerry Talley 11/8/2007, 10:38 pm
- Many small targets VS 1larger target - Sean 11/9/2007, 1:00 am
Re: Which Machine for an $80 gold coin Cache with a microwave tower 1/2 mile away plus Iron trash??? - Bob sw.mo 11/8/2007, 5:26 am
- ".. big heads picked up the small stuff ..go to a 2-box like a TM 808 .." - Sean 11/8/2007, 10:24 am
  - Re: ".. big heads picked up the small stuff ..go to a 2-box like a TM 808 .." - Bob sw.mo 11/8/2007, 11:18 am
    - Re: ".. big heads picked up the small stuff ..go to a 2-box like a TM 808 .." - Tom_in_CA 11/8/2007, 11:49 am
You might want to review Carl's cache test - G.Baker 11/7/2007, 1:12 pm
- GS5 Does sound very good for my situation. - Sean 11/8/2007, 11:47 am
- ..this was quite an eye opener .. Indeed! Thanks - Sean 11/7/2007, 11:38 pm
A Two-box would work well, - Paul (Ca) 11/7/2007, 12:09 am
- Re: "Pieces from a WWII plane crash site !" - Sean 11/7/2007, 11:24 am
  - Here's a few Two-box units to look at, - Paul (Ca) 11/8/2007, 9:33 am
    - Re: Here's a few Two-box units to look at, - antonio 11/20/2007, 12:16 am
  - Re: "Pieces from a WWII plane crash site !" - Daniel 11/8/2007, 1:04 am
    - Yes, Same type as yours. - Paul (Ca) 11/8/2007, 8:53 am
  - Re: "Pieces from a WWII plane crash site !" - Tom_in_CA 11/7/2007, 11:54 am
    - "a full-sized jar of coins" VS a small handfull of gold coins ? - Sean 11/7/2007, 10:26 pm
      - You aren't going to detect the coins. - Mike Hillis 11/7/2007, 11:00 pm
        
        "...detecting is the lid to the jar, not the coins themselves.." how much lid after 200 years? - Sean 11/8/2007, 12:00 am
        
        Re: "...detecting is the lid to the jar, not the coins themselves.." how much lid after 200 years? - G.Baker 11/8/2007, 12:42 am
        
        John Landis Mason , 1831- Feburary 1902. This was buried before he was born - Sean 11/8/2007, 8:02 am
        
        Re: John Landis Mason , 1831- Feburary 1902. This was buried before he was born - Tom_in_CA 11/8/2007, 11:45 am

What frequency does the Ground Hawk operate at? I'm told..... - John N 11/6/2007, 11:13 pm

Re: What frequency does the Ground Hawk operate at? I'm told..... - Brian 11/7/2007, 4:15 am

Moore Creek, Alaska - A Prospector's Story, Part Two - Steve Herschbach 11/6/2007, 11:05 am

Re: Moore Creek, Alaska - A Prospector's Story, Part Two - Bjorn 11/7/2007, 2:57 pm
Congratulations Steve! - Mike Hillis 11/6/2007, 6:23 pm
- Re: Congratulations Steve! - Steve Herschbch 11/7/2007, 10:27 am

Watch out for the differences Andy,NM and AndyS - Andy,NM 11/5/2007, 7:05 pm

F-75 - Paul (Ca) 11/8/2007, 10:30 am
- Hello Paul - Andy,NM 11/8/2007, 8:26 pm
My apologies! - Steve Herschbach 11/5/2007, 9:20 pm
- No problem just wanted to point that out.. - Andy,NM 11/5/2007, 11:00 pm
  - Andy, do you like the Platinum better than the F4? - RichW 11/6/2007, 9:49 am
    - Re: Andy, do you like the Platinum better than the F4? - Andy,NM 11/6/2007, 10:08 pm
      - Re: Andy, do you like the Platinum better than the F4? - RichW 11/7/2007, 11:53 am
  - Thanks Andy! - Steve Herschbach 11/6/2007, 12:10 am

Big Bud Pro - PaulWV 11/5/2007, 9:37 am

Re: Big Bud Pro Question - git-r-dug 11/7/2007, 4:40 pm
- Re: Big Bud Pro Question - PaulWV 11/7/2007, 4:51 pm
  - Re: Big Bud Pro Question - git-r-dug 11/7/2007, 5:04 pm
    - Re: Big Bud Pro Question - PaulWV 11/7/2007, 6:02 pm
One of the best metal detectors ever made - MI(Iowa) 11/6/2007, 8:40 am
- I Agree!! - Seeker 11/6/2007, 9:20 am
Re: Big Bud Pro - was this model prior to the Select 220 & 220-D ? n/t - Terry B WA 11/5/2007, 10:48 pm
- Yes - Bob sw.mo 11/5/2007, 11:24 pm

detector pro - Daniel 11/5/2007, 4:40 am

detector pro customer svc. for headphones has always been top notch for me - Jerry Talley 11/5/2007, 6:44 pm
Replace the plug with these, Solderless Right-Angle Male BNC Plug. - Paul (Ca) 11/5/2007, 7:21 am
- Re: Replace the plug with these, Solderless Right-Angle Male BNC Plug. - Daniel 11/7/2007, 11:37 pm
  - That's great! - Paul (Ca) 11/8/2007, 10:15 am
- Re: Replace the plug with these, Solderless Right-Angle Male BNC Plug. - Daniel 11/5/2007, 8:30 am

RE: China - yes, they are going to be a problem for us. - Terry B WA 11/4/2007, 9:01 pm

Not necessarily a Nuclear Power Plant. - Beachcomber 11/5/2007, 6:17 pm
- Re: Not necessarily a Nuclear Power Plant. - Carl 11/6/2007, 12:13 am
- I learned something today. Thanks! n/t - Terry B WA 11/5/2007, 10:41 pm
Re: RE: China - yes, they are going to be a problem for us. - Carl 11/4/2007, 11:04 pm
- Re: RE: China - yes, they are going to be a problem for us. - John N 11/5/2007, 3:34 am
  - Credit Card Society!! - Arthur-Canada 11/8/2007, 5:43 pm
  - Re: RE: China Yes, but I also feel that he would be eliminated if he were to be elected. - Terry B WA 11/5/2007, 3:24 pm

What is the hardest that you have worked for a junk target - Tom (AZ) 11/4/2007, 7:53 am

Maybe not the hardest I have dug... - Tom NWMI 11/4/2007, 2:13 pm
Just this summer... - Steve Herschbach 11/4/2007, 12:40 pm
- Re: Steve- You know that - George Baker 11/4/2007, 4:25 pm
  - Re: Steve- You know that - Steve Herschbach 11/5/2007, 11:07 am
Re: What is the hardest that you have worked for a junk target - Seeker 11/4/2007, 10:45 am
Re: What is the hardest that you have worked for a junk target - Bjorn 11/4/2007, 8:42 am

Wow....20" deep coins! - Mike Hillis 11/4/2007, 12:47 am

Re: Wow....20" deep coins! - Beachcomber 11/5/2007, 6:10 pm
Re: Wow....20" deep coins! - George Kinsey 11/4/2007, 7:54 am
Re: Wow....20" deep coins! - Bjorn 11/4/2007, 5:01 am
Re: Wow....20" deep coins! - Steve Herschbach 11/4/2007, 1:33 am
Re: Wow....20" deep coins! - Tom_in_CA 11/4/2007, 1:08 am
- Re: Wow....20" deep coins! - Bjorn 11/4/2007, 5:07 am
Re: Wow....20" deep coins! - Carl 11/4/2007, 1:01 am

Real Life Prospecting Story - Steve Herschbach 11/3/2007, 3:23 pm

As always a Great story!!!! Can't wait to read Part 2!!!!! - Beachcomber 11/5/2007, 8:05 pm
Re: Real Life Prospecting Story - Bjorn 11/3/2007, 4:54 pm

On the subject of First Texas/Fisher bashing.... - Captain Hambone 11/2/2007, 1:03 am

My respect for that post..... - Andy,NM 11/8/2007, 12:52 am
Re: On the subject of First Texas/Fisher bashing.... - Bjorn 11/3/2007, 1:46 pm
- Re: On the subject of First Texas/Fisher bashing.... - john lynn 11/8/2007, 6:40 pm
Realistically Speaking.... - John - Edmonton 11/3/2007, 10:22 am
Re: On the subject of First Texas/Fisher bashing.... - TerryR 11/3/2007, 7:25 am
- Come on Terry - AndyS 11/3/2007, 12:28 pm
  - Re: Come on Terry - TerryR 11/3/2007, 7:30 pm
    - Re: Come on Terry - Daniel 11/5/2007, 4:27 am
      - Re: Come on Terry - TerryR 11/5/2007, 2:26 pm
old Ray Charles himself could see that ---- - CLARK 11/2/2007, 7:58 pm
By the way.......... - JB(MS) 11/2/2007, 4:11 pm
- Re: By the way.......... - Captain Hambone 11/3/2007, 9:03 am
One thing..... - JB(MS) 11/2/2007, 3:55 pm
- Re: One thing..... - Captain Hambone 11/3/2007, 9:07 am
- Re: One thing..... - Bjorn 11/2/2007, 4:13 pm
No bashing going on - Steve Herschbach 11/2/2007, 11:51 am
- Steve.... - Captain Hambone 11/3/2007, 8:56 am
  - Your respect is worth nothing - Steve Herschbach 11/3/2007, 2:18 pm
- Re: No bashing going on - Carl 11/2/2007, 1:00 pm
  - Why Fisher Died - Steve Herschbach 11/3/2007, 4:58 pm
    - That's exactly what happened Steve. - RichW 11/3/2007, 6:39 pm
  - Carl... - Captain Hambone 11/3/2007, 8:58 am
    - Re: Carl... - Carl 11/3/2007, 10:53 am

I have never mentioned the Manufacturer of the new PI - George Kinsey 11/1/2007, 7:53 pm

Re: sounds like..... - Tom_in_CA 11/2/2007, 12:44 am
- Re: On the beach it works great - George Kinsey 11/2/2007, 5:29 am
  - Re: On the beach it works great - jim straight 11/3/2007, 1:56 am
    - Re: Yes - George Kinsey 11/3/2007, 8:37 am
      - Re: Yes - jim straight 11/4/2007, 12:05 am
        
        Re: Yes - Carl 11/4/2007, 7:51 pm
        
        Re: Yes - jim straight 11/4/2007, 11:34 pm

Tale of two PI's - Reg 11/1/2007, 9:35 am

Re: Tale of two PI's - norm 11/1/2007, 10:58 pm
- Re: Tale of two PI's - Carl 11/1/2007, 11:39 pm
Re: Tale of two PI's - Carl 11/1/2007, 10:53 am
- Re: Tale of two PI's - Reg 11/1/2007, 2:02 pm
  - Re: Tale of two PI's - Bjorn 11/1/2007, 3:31 pm
    - WHAT I DON'T UNDERSTAND IS---- - CLARK 11/1/2007, 6:08 pm
      - Re: WHAT I DON'T UNDERSTAND IS---- - Dave Emery 11/2/2007, 3:51 am
        
        Re: WHAT I DON'T UNDERSTAND IS---- - Dave in Katherine NT Australia 11/2/2007, 11:59 pm
        
        Good one Dave - Bjorn 11/2/2007, 2:39 pm
        
        3 products? - Carl 11/2/2007, 2:12 pm
        
        who was the guy that said ---- - CLARK 11/2/2007, 11:45 am
        
        Re: who was the guy that said ---- - Wayne/TX 11/2/2007, 3:29 pm
        
        Re: who was the guy that said ---- - Tom_in_CA 11/4/2007, 1:15 am
        
        Re: who was the guy that said ---- - Tom_in_CA 11/2/2007, 2:11 pm
        
        Thanx Dave - Seeker 11/2/2007, 10:01 am
        
        Re: WHAT I DON'T UNDERSTAND IS---- - Joe Schell 11/2/2007, 8:52 am
        
        Re:Great post Dave - George Kinsey 11/2/2007, 5:54 am

Hot ones and Cold ones again Carl - Tom (AZ) 11/1/2007, 8:05 am

Re: Hot ones and Cold ones again Carl - Reg 11/1/2007, 9:55 am
- Good points Reg - Tom (AZ) 11/1/2007, 10:47 pm

Coins - PaulWV 11/1/2007, 7:35 am

Re: Coins - JB(MS) 11/1/2007, 10:01 pm
Re: Coins - Wayne/TX 11/1/2007, 2:42 pm

White's or other pi that Tex was supposed to test, what happened? - Jerry Talley 10/30/2007, 11:36 pm

Re:Jerry,Jerry , Jerry - George Kinsey 11/1/2007, 8:07 pm
- Thanks Tex, at least we know you are testing something from someone. It's not like Bigfoot or Nessy? - Jerry Talley 11/1/2007, 11:54 pm
WHAT A JOKE ! - CLARK 10/31/2007, 6:09 pm
- Re:Not true Clark. - George Kinsey 11/2/2007, 5:35 am
Re: White's or other pi that Tex was supposed to test, what happened? - Carl 10/31/2007, 10:02 am
- Re: White's or other pi that Tex was supposed to test, what happened? - Brian 11/1/2007, 5:31 am
  - Re: White's or other pi that Tex was supposed to test, what happened? - Carl 11/1/2007, 6:48 am
    - Re: White's or other pi that Tex was supposed to test, what happened? - Brian 11/2/2007, 4:38 am
      - Re: I prefere the Goldmaxx power - George Kinsey 11/2/2007, 5:49 am
        
        Re: I prefere the Goldmaxx power - Brian 11/2/2007, 12:47 pm
        
        Re:Going to Vegas this week. - George Kinsey 11/2/2007, 7:47 pm
        
        I thought it would be the Goldemn Triangle not the tables... - Brian 11/6/2007, 7:41 am

F75 or Exterra 70 ? - Mark L 10/29/2007, 7:47 pm

Re: F75 or Exterra 70 ? - Tom 10/30/2007, 4:48 pm
- the xterrible 70 deeper?? - relic raider 11/2/2007, 12:56 pm
  - Re: the xterrible 70 deeper?? - Tom 11/2/2007, 2:32 pm
- Re: F75 or Exterra 70 ? - Lawrenzo 10/31/2007, 10:19 pm
  - Re: F75 or Exterra 70 ? - Carl 11/1/2007, 1:52 am
- Re: F75 or Exterra 70 ? - AndyS 10/31/2007, 7:19 am
  - Re: F75 or Exterra 70 ? - Tom 10/31/2007, 1:18 pm
Re: F75 or Exterra 70 ? - BlazoBill 10/30/2007, 8:29 am
- Re: F75 or Exterra 70 ? - Lawrenzo 10/31/2007, 10:21 pm
- Re: F75 or Exterra 70 ? - AndyS 10/31/2007, 7:15 am
  - Thanks for that vote of confidence. - BlazoBill 10/31/2007, 11:04 pm
    - Re: Thanks for that vote of confidence. - Carl 11/1/2007, 2:22 am
      - Re: Thanks for that vote of confidence. - BlazoBill 11/1/2007, 8:22 am
        
        Re: Thanks for that vote of confidence. - AndyS 11/1/2007, 10:35 am
  - What happened to you Andy? - Steve Herschbach 10/31/2007, 3:15 pm
    - Re: What happened to you Andy? - TerryR 11/1/2007, 9:39 am
    - Re: What happened to you Andy? - Lawrenzo 10/31/2007, 10:26 pm
      - Re: What happened to you Andy? - Steve Herschbach 10/31/2007, 10:50 pm
    - Steve... I like your style... - jim straight 10/31/2007, 6:31 pm
  - Re: F75 or Exterra 70 ? - Tom 10/31/2007, 1:52 pm
Re: F75 or Exterra 70 ? - Paul (Ca) 10/29/2007, 10:56 pm
Re: F75 or Exterra 70 ? - Lawrenzo 10/29/2007, 10:02 pm
- Re: F75 or Exterra 70 ? - Mark L 10/30/2007, 3:35 pm