A few very important things to remember abaout the Vaquero & Cibola - Monte 11/8/2004, 8:58 am I notice this - Rick(ND) 11/8/2004, 5:32 pm Re: I notice this - Beachcomber 11/8/2004, 5:40 pm Monte - Sweep Speed - Nick(SC) 11/8/2004, 10:19 am Nick, if you would like to hunt at a little faster pace, - Monte 11/8/2004, 1:10 pm Welp....couldn't help myself and fell prey to... - George Fatizzi 11/7/2004, 9:07 pm Did some test after you called - Rick(ND) 11/8/2004, 12:09 am Thanks for the tests Rick....I'm impressed with these numbers - George Fatizzi 11/8/2004, 8:18 am Re: Did some test after you called - Beachcomber 11/8/2004, 6:42 am Re: Welp....couldn't help myself and fell prey to... - Bob sw.mo. 11/7/2004, 10:21 pm The next couple field tests - Scott Me. 11/5/2004, 7:25 pm Re: The next couple field tests - Jeff-VT 11/8/2004, 6:54 pm I am jumping on the bandwagon.... - e. j. fowler 11/6/2004, 11:45 pm Ferrite "Simulation" - Ralph 11/8/2004, 6:46 pm Ground Balancing to 'ferrite.' - Monte 11/7/2004, 8:21 am Ferrite is Ferrite is Ferrite........(if) - Ralph 11/8/2004, 6:30 pm Re: Hey Monte: Ground Balancing to 'ferrite.' - jim straight 11/8/2004, 4:19 pm I used to use The Iron Eliminator..I think it was called. - Scott Me 11/8/2004, 5:07 pm Field tests - Carl 11/7/2004, 2:37 am Hey man......always good to do tests in the field....and write about it. - Scott Me. 11/7/2004, 12:05 am Has anyone....... - Ralph 11/6/2004, 12:10 pm vaquero, Ace 250, and other 'stuff.' - Monte 11/6/2004, 4:53 am Re: vaquero, Ace 250, and other 'stuff.' - Bob sw.mo 11/6/2004, 2:26 pm If I still hade my Prizm i would compare the 250 against it too... - Scott Me. 11/6/2004, 9:08 am Re: vaquero, Ace 250, and other 'stuff.' - Beachcomber 11/6/2004, 6:37 am After spending a good deal of Saturday with the Vaquero I am even more pleased, - Monte 11/7/2004, 7:41 am Monte do you have any thoughts on the Vaquero's - Tom NW MI 11/7/2004, 9:22 am Tom, I have compared, and will do some more today, - Monte 11/8/2004, 9:42 am Thanks a bunch Monte, will be looking forward to todays results. N/T - Tom NW MI 11/8/2004, 4:07 pm The hype is already starting on the Vaquero - George Fatizzi 11/5/2004, 8:04 pm Re: The hype is already starting on the Vaquero - philNCcoast 11/6/2004, 10:36 pm Yah i read the same thing.... - Scott me 11/5/2004, 8:30 pm Re: Yah i read the same thing.... - eddiecurrent 11/5/2004, 9:29 pm Why are some AM modes preset to max & why? - willy 11/4/2004, 9:27 pm Re: Why are some AM modes preset to max & why? - Ralph 11/5/2004, 7:39 pm excellent answer.... - e. j. fowler 11/6/2004, 11:53 pm Yeah, what ralph said - Jbird 11/5/2004, 10:34 pm ANY DETECTOR THAT HAS--- - CLARK 11/5/2004, 10:07 am The day and a half test of the 1270 and Advantage - Scott me 11/4/2004, 6:24 pm yur bias against fisher is obvious - Jeff-VT 11/8/2004, 6:45 pm Nice report - Tom_in_CA 11/5/2004, 6:19 pm I have tried it before... - Scott Me. 11/5/2004, 7:17 pm Good post Scott. This weekend I hope to do some tests - Tony (Michigan) 11/5/2004, 3:25 pm Re: The day and a half test of the 1270 and Advantage - golddust 11/5/2004, 2:01 am Scott, I've seen pretty much the same except for..... - Dig'n in Va. 11/5/2004, 12:05 am Si I am NOT CRAZY>>>i thought the silencer was working better off - Scott Me 11/5/2004, 7:48 am Re: Si I am NOT CRAZY>>>i thought the silencer was working better off - Tom NW MI 11/5/2004, 8:15 am Good report Scott! - Tom NW MI 11/4/2004, 7:28 pm Yah I could see the 1270 doing good in high stubble... - Scott me. 11/4/2004, 7:44 pm Always forget to say something - Scott Me. 11/4/2004, 6:36 pm Some additional 1270 notes - Scott Me. 11/4/2004, 7:18 pm Thanks Scott - jeff@middlesex 11/4/2004, 7:40 pm Some upcoming in the field tests. - Scott Me. 11/3/2004, 10:57 pm Do you think you will have a Garrett 250 by next week? n/t - jeff@middlesex 11/4/2004, 1:12 pm Supposedly will ship tomorrow...but... - Scott Me. 11/4/2004, 7:47 pm Non-Metered detectors - Drew 11/4/2004, 11:42 am I think the 1270.... - John in Mass. 11/4/2004, 9:11 am Well I retired for a month.... - Scott Me 11/4/2004, 9:18 am Compare an Ace 250 and an MXT? There's a bit of a mismatch! - Monte 11/4/2004, 7:58 am That is just kinda some fun.....in that.... - Scott Me 11/4/2004, 9:13 am Yes, from the ads the color looks 'OK' to me. - Monte 11/4/2004, 1:39 pm Ahhh.the Scorpion gold Stinger...man I wish... - Scott Me. 11/4/2004, 7:50 pm Re: Yes, from the ads the color looks 'OK' to me. - jim straight 11/4/2004, 2:32 pm Scott, concerning the Advantage - Tony (Michigan) 11/4/2004, 5:21 am Re: Scott, concerning the Advantage - Tom NW MI 11/4/2004, 10:02 am I have run into something similar....I used an Advantage since the day... - Scott Me 11/4/2004, 9:16 am Rethink a Garrett - Bob sw.mo 11/3/2004, 4:50 pm What Year, What Model? - John-Edmonton 11/3/2004, 9:23 pm Re: What Year, What Model? - Bob sw.mo 11/3/2004, 10:41 pm Re: What Year, What Model? - Wayne/TX 11/4/2004, 9:11 am Hey Yall - David-Alabama-GoVols 11/3/2004, 9:07 am Re: Hey Yall - Bob swmo 11/3/2004, 10:12 am Re: Hey Yall - David-Alabama-GoVols 11/3/2004, 11:41 am Re: Hey Yall - Bob sw.mo 11/3/2004, 4:40 pm Re: Hey Yall - Bob sw.mo. 11/3/2004, 4:33 pm Anybody know where I can get a 5 pin ribbon cable for theTreasure Baron - Tony (Michigan) 11/1/2004, 10:06 pm Re: Anybody know where I can get a 5 pin ribbon cable for theTreasure Baron - Scot Me. 11/5/2004, 8:48 pm If you have an Explorer XS and DFX would getting a Tecknetics Mark 1 be wise? - Tony (Michigan) 11/1/2004, 2:50 pm Here's not take on the Mark 1 - Paul (Ca) 11/2/2004, 10:46 am Re: Here's not take on the Mark 1 - Bob sw.mo 11/3/2004, 6:35 am Bounty hunter 4" coil vs. 6" six shooter coil. - Paul (Ca) 11/3/2004, 8:23 pm Re: Bounty hunter 4" coil vs. 6" six shooter coil. - Bob sw.mo 11/3/2004, 10:48 pm Re: Bounty hunter 4" coil vs. 6" six shooter coil. - Paul (Ca) 11/5/2004, 7:20 pm Only get one if you want to find coins and relics that the others missed, LOL - Jerry Talley 11/1/2004, 6:54 pm If it goes just as deep as Explorer and DFX - Tony (Michigan) 11/2/2004, 11:07 am Why would you want a Mark 1.....good question... - Scott Me. 11/2/2004, 8:34 pm Scott - Tony (Michigan) 11/3/2004, 6:35 am Re: Scott - Scott Me 11/3/2004, 8:32 am Being one or two filter do you have to swing it fast? (nt) - Tony (Michigan) 11/1/2004, 8:37 pm No, Its Classified as a Slow - Seeker (ak) 11/1/2004, 11:24 pm Question on Discovery and their re-release of the new baron..... - Scott Me. 11/1/2004, 10:21 am Re: New Baron - George Payne 11/1/2004, 12:00 pm What is Discovery's contactr info.....anyone...thanks george for the post....N/T - Scott Me. 11/1/2004, 12:47 pm Re: What is Discovery's contactr info.....anyone...thanks george for the post....N/T - jim straight 11/1/2004, 1:28 pm Re: Discoverys contact....... - George Payne 11/1/2004, 2:38 pm Re: Discoverys contact....... - jim straight 11/2/2004, 12:30 am CZ-3D VS. T.B. COIN TRAX - Harold,ILL. 10/28/2004, 9:27 pm Re: CZ-3D VS. T.B. COIN TRAX - JB(MS) 10/28/2004, 10:28 pm I have used a CZ and Cointrax in mineralized soil - Scott Me. 10/30/2004, 3:58 pm X-5 Vs CZ ... X-5 wins it for me - MIKE ... ME 11/1/2004, 7:32 am Re: X-5 Vs CZ ... X-5 wins it for me - JB(MS) 11/1/2004, 3:52 pm Take it out of the closet, fire it up & use it, or ... - MIKE ... ME 11/1/2004, 5:49 pm Intelligent converstaion never ruffles my feathers.....plus... - Scott Me. 11/1/2004, 9:39 am Just need a new place to swing our coils - MIKE ... ME 11/1/2004, 5:39 pm I gotta find me some new places like I had a few years ago... - Scott Me. 11/1/2004, 6:02 pm Re: I have used a CZ and Cointrax in mineralized soil - JB(MS) 10/30/2004, 5:45 pm Re: I have used a CZ and Cointrax in mineralized soil - Carl 10/30/2004, 9:07 pm Leaves?? - Jbird 10/30/2004, 10:54 pm My wife just gave up hoping I will ever rake the leaves... - Scott Me. 10/30/2004, 10:14 pm Know what you mean - JB(MS) 10/30/2004, 9:29 pm Hey JB...it's F A T I Z Z I !! - George Fatizzi 10/31/2004, 8:49 pm Sorry George - JB(MS) 10/31/2004, 9:51 pm I learned to spell his last name by remembering it as....Fat..... Izzi - Scott 11/1/2004, 9:42 am Bahaa haaah hhhaa - George Fatizzi 11/1/2004, 12:17 pm Oh I agree with you.... - Scott Me 10/30/2004, 9:06 pm Re: Oh I agree with you.... - JB(MS) 10/30/2004, 9:51 pm Goldtrax questions - Carl 10/31/2004, 3:52 pm Re: Goldtrax questions - JB(MS) 10/31/2004, 5:09 pm Cool...by the way...did George by chance program... - ScottMe 10/30/2004, 10:12 pm Tone ID - JB(MS) 10/31/2004, 10:08 am That's fine....can't have it all anyway... - Scott Me. 10/31/2004, 4:45 pm Trade a near new Golden uMax for T.Baron ??? - Willy 10/28/2004, 4:15 pm The Wilson "Coin Select" for sale by Kellyco.... - John N 10/28/2004, 1:24 am Re: The Wilson "Coin Select" for sale by Kellyco.... - Richard Morris 10/30/2004, 8:16 am Re: The Wilson "Coin Select" for sale by Kellyco.... - Richard Morris 10/29/2004, 9:24 am Maybe it is time for this Carl... - Scott Me. 10/27/2004, 9:32 am Re: Maybe it is time for this Carl... - Carl 10/28/2004, 1:46 am One of the standard test that would have to be done.. - Scott Me. 10/28/2004, 12:13 pm Re: One of the standard test that would have to be done.. - Hard Nosed 10/29/2004, 7:34 pm Re: One of the standard test that would have to be done.. - Beachcomber 10/30/2004, 4:39 am I agree ...they used to do that....that is how we got cars like the Ford Pinto and infamous K-cars.. - Scott Me. 10/30/2004, 11:55 am Re: One of the standard test that would have to be done.. - Carl 10/30/2004, 5:14 am I agree.... - Beachcomber 10/30/2004, 8:33 am That all makes sense.......... - Scott me 10/29/2004, 9:04 pm soil matrix - Carl 10/30/2004, 4:58 am I was thinking of that...how to measure soil mineralization...you could... - Scott Me. 10/30/2004, 11:52 am Good idea...plus - Beachcomber 10/30/2004, 8:42 am whos gunna run this venture? - Jeff-VT 10/29/2004, 6:38 am No we aren't gonna do it......we were waiting for you - Scott Me 10/29/2004, 12:39 pm well sinse I actually do dig.... - Jeff-VT 10/29/2004, 7:37 pm You realy are about the most ignorant person to post in months..... - Scott Me 10/29/2004, 8:36 pm FRIENDLY REMINDER TO ALL - Carl 10/30/2004, 5:06 am I dont think the big consumer mags - Scott Me. 10/28/2004, 10:02 am Consumer Reports - Cliff 10/28/2004, 9:56 am Hey that was some great info...thanks NT - Scott Me, 10/28/2004, 10:04 am Re: Maybe it is time for this= Scott, the only problem is - Chuck Diggin it in Florida 10/27/2004, 9:58 pm Oh it would never stop us junkies from buying....we are the addicts with no hope...but... - Scott me. 10/27/2004, 10:02 pm Nice thought but here's the but.. - Tom NW MI 10/27/2004, 9:50 am You made think of another point....you will never be able to... - Scott Me. 10/27/2004, 1:25 pm No..actually you do not have to travel to each others locations... - Scott Me. 10/27/2004, 12:36 pm A few comments for manufacturers - long - Carl 10/27/2004, 2:06 am Re: A few comments for manufacturers - long - JohninCt 11/7/2004, 8:42 am I dont use a fisher... - John in Mass. 10/29/2004, 2:41 pm I think for some it is irrelevant who he works for... - Scott Me. 10/29/2004, 3:53 pm well i was "banned for life" - John in Mass. 11/1/2004, 10:32 am Re: A few comments from a Lurker - Drew 10/28/2004, 5:05 pm Good observations, Drew - Carl 10/29/2004, 1:43 am OOPS ! Meant to say Thanks Carl! - Drew 10/29/2004, 5:08 pm Re: Good observations, Drew - Drew 10/29/2004, 12:52 pm You are obvioucly wise beyond your years... - Scott me. 10/28/2004, 5:51 pm Thanks Scott - Drew 10/29/2004, 1:06 pm Actually the new Minelab 3000 is set to be updated via a link.. - Scott Me. 10/29/2004, 1:51 pm modularity - Carl 10/31/2004, 9:19 pm Re: A few comments for manufacturers - long - eddiecurrent 10/27/2004, 11:27 pm I agree on the manual GB - Tom NW MI 10/28/2004, 9:14 am Re: A few comments for manufacturers - long= Carl, you forgot to coplement Garrett for making - Chuck Diggin it in Florida 10/27/2004, 10:03 pm One of Garretts best detectors never gets noticed... - Scott Me. 10/27/2004, 11:04 pm Re: One of Garretts best detectors never gets noticed... - jim straight 10/28/2004, 11:51 pm Yah..sometimes a detector works better in area other than it's prime objective.... - Scott Me. 10/29/2004, 6:48 pm Very funny, Scott - Carl 10/31/2004, 3:57 pm Well said Carl...only problem is.... - Scott me. 10/27/2004, 8:45 am I agree Garrett is so.. - Tom NW MI 10/27/2004, 7:24 am Sorry bud...Dave J. whent to Bounty hunter from what I heard - Scott Me. 10/27/2004, 8:47 am Re: Sorry bud...Dave J. whent to Bounty hunter from what I heard - Tom NW MI 10/27/2004, 8:56 am Re: Sorry bud...Dave J. whent to Bounty hunter from what I heard - jeff@middlesex 10/27/2004, 2:18 pm Whites internet sales... - ArtWI 10/27/2004, 6:31 pm LMAO :)...... - JP(NB) 10/27/2004, 4:56 am Man...I just noticed...Garrett stole my colors....and ya'll that my Yaller was odd - Scott Me. 10/27/2004, 12:54 am Just an early "heads up" - George Fatizzi 10/25/2004, 8:57 am Sold early to JB! Thanks JB! - George Fatizzi 10/27/2004, 8:37 pm I assume mod questions are welcome here........ - Rob (B.C.) 10/24/2004, 11:55 pm Hi Rob... - George Fatizzi 10/25/2004, 7:27 am Re: Hi Rob...= George does a nicer job than me, but - Chuck Diggin it in Florida 10/27/2004, 9:56 pm I was just going to ask about those........ - Rob (B.C.) 10/28/2004, 2:01 am Actually that's a great idea Chuck! - George Fatizzi 10/27/2004, 10:32 pm Oooops! I meant the 1/8" jacks are a little larger and sturdier... - George Fatizzi 10/25/2004, 9:13 am Hey Tom NW MI, found my first Barber with the Advantage today! - Tony (Michigan) 10/24/2004, 7:01 pm Hey, in your own backyard too... - Tom NW MI 10/25/2004, 7:23 am Re: Hey Tom NW MI, found my first Barber with the Advantage today! - Carl 10/25/2004, 12:54 am Carl - Tony (Michigan) 10/25/2004, 2:28 pm What do you think is best 3 or 4 tone id machine? - Steve Herschbach 10/23/2004, 1:31 pm I'm surprised nobody mentioned the Fisher ID Excel - George Fatizzi 10/25/2004, 7:33 am Re: I'm surprised nobody mentioned the Fisher ID Excel - Tom NW MI 10/25/2004, 7:51 am Re: What do you think is best 3 or 4 tone id machine? - JB(MS) 10/23/2004, 4:56 pm I forgot about that machine..I have to agree - Scott Me. 10/24/2004, 10:50 pm Re: What do you think is best 3 or 4 tone id machine?= Well first of all - Chuck, Diggin' it in Florida 10/23/2004, 4:17 pm Re: What do you think is best 3 or 4 tone id machine? - Beachcomber 10/23/2004, 4:04 pm Fisher CZ 3D n/t - jeff@middlesex 10/23/2004, 3:10 pm Compass tri-tone is great - Tony (Michigan) 10/23/2004, 3:08 pm No Doubt About it TEK MK 1 - Seeker (ak) 10/23/2004, 2:00 pm Re: What do you think is best 3 or 4 tone id machine? - Scott Me. 10/23/2004, 1:43 pm Tesoro's new Tone ID machine with HOT circuitry - Scott Me. 10/23/2004, 12:12 pm Love it , Scott!! n/t - Carl 10/23/2004, 6:27 pm Re: Tesoro's new Tone ID machine with HOT circuitry - Beachcomber 10/23/2004, 3:57 pm Good One Scott - Seeker (ak) 10/23/2004, 1:58 pm What's new about the new detectors? - Carl 10/23/2004, 2:33 am Re: What's new about the new detectors? - Tom_in_CA 10/24/2004, 10:15 am Re: What's new about the new detectors? - eddiecurrent 10/24/2004, 1:12 am Re: What's new about the new detectors?= You don't see whats new? - Chuck Diggin it in Florida 10/23/2004, 10:40 am You got it Chuck! and - Tom NW MI 10/23/2004, 11:38 am Alright Carl....looks like we hop out of the same side of the bed... - Scott Me. 10/23/2004, 10:10 am Amen n/t - jeff@middlesex 10/23/2004, 8:07 am Re: What's new about the new detectors? - Beachcomber 10/23/2004, 7:21 am Hey guys...I just thought of this...wonder if that nice Blue on the Quattro is more cheasy paint...l - Scott Me. 10/23/2004, 10:13 am Re: Hey guys...I just thought of this...wonder if that nice Blue on the Quattro is more cheasy paint - Beachcomber 10/23/2004, 3:47 pm If the new Tesoro's use the HOT - Tom NW MI 10/23/2004, 8:33 am Tesoro could have realy made one of these newer detectors a real killer with one simple feature.... - Scott Me. 10/23/2004, 11:56 am Re: Tesoro could have realy made one of these newer detectors a real killer with one simple feature. - Beachcomber 10/23/2004, 3:53 pm Carl ; you are absolutely correct. New no longer means....."new"!!!!!! - John N 10/23/2004, 3:51 am True John N - scott-devon 10/23/2004, 8:25 am O.K...so i guess retirng was futile....now on to the lower frequency G-maxx - Scott Me. 10/22/2004, 10:49 pm Scott I practiced - Seeker (ak) 10/23/2004, 6:00 pm Hey Scott, don't feel bad - George Fatizzi 10/22/2004, 11:22 pm Thanks george...I read your post on the Depot... - Scott Me. 10/22/2004, 11:39 pm Re: O.K...so i guess retirng was futile....now on to the lower frequency G-maxx - Beachcomber 10/22/2004, 11:03 pm There is a response from Sabisch concerning the Quatro... - Scott me. 10/22/2004, 9:16 pm Just read it - JB(MS) 10/22/2004, 10:42 pm I also think Andy is probably a good egg - Scott Me. 10/22/2004, 10:46 pm One interesting thing about the Quattro (I can't validate it yet though) - George Fatizzi 10/22/2004, 11:27 pm Re: I also think Andy is probably a good egg - Beachcomber 10/22/2004, 10:59 pm Last notes on the Gold MAxx - Scott Me 10/22/2004, 8:37 pm question about minelab detector ---- - clark 10/22/2004, 4:11 pm Clark, how do you like your Advantage? - Tony (Michigan) 10/22/2004, 9:34 pm I just bought the elite and the advantage ---- - clark 10/23/2004, 8:35 am MY Sovereign does the same, - Paul (Ca) 10/22/2004, 9:29 pm thanks for the reply--will - clark 10/23/2004, 8:43 am Anyone interested in an INFINIUM ? - Chuck Diggin it in Florida 10/22/2004, 9:44 am Question for Tom NW MI on Advantage detector - Tony (Michigan) 10/22/2004, 7:47 am Sent you an email a while back, did you get it? n/t - Tom NW MI 10/22/2004, 8:10 am O.K. I see it now . . .question - Tony (Michigan) 10/22/2004, 8:38 am link - Tom NW MI 10/22/2004, 10:10 am according to dalake on the Treasure forum - Tony (Michigan) 10/22/2004, 2:10 pm Detech coil - Tom NW MI 10/22/2004, 7:46 pm Forgot the downside - Tom NW MI 10/22/2004, 7:56 pm Re: Forgot the downside - Tony (Michigan) 10/22/2004, 9:42 pm That's a lot of disc when working - Tom NW MI 10/22/2004, 10:11 pm Thanks Tom. I'll try the 11:00 setting (nt) - Tony (Michigan) 10/23/2004, 8:58 am Re: Thanks Tom. I'll try the 11:00 setting (nt) - Tom NW MI 10/23/2004, 9:50 am Tom, been digging aluminum foil - Tony (Michigan) 10/23/2004, 7:54 pm Re: Tom, been digging aluminum foil - Tom NW MI 10/23/2004, 9:29 pm Well...I'm a sucker for tone ID so I just ordered a new - George Fatizzi 10/21/2004, 10:58 pm Speaking of tone ID - scott-devon 10/21/2004, 11:06 pm Re: Speaking of tone ID - Rick, N. MI 10/22/2004, 2:20 am